07-02-2012 01:36 AM
Hi,
I have below log message in switch.
Jul 2 12:38:59.923 IST: %PM-4-ERR_DISABLE: invalid-policy error detected on Fa0/15, putting Fa0/15 in err-disable state
Jul 2 12:38:59.939 IST: pm_start_recover: invalid operErrReason for Fa0/15
Jul 2 12:39:00.946 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/15, changed state to down
Jul 2 12:39:01.944 IST: %LINK-3-UPDOWN: Interface FastEthernet0/15, changed state to down
ME-3400#sh policy-map int fa0/15
FastEthernet0/15
Service-policy input: Broadband_User
Class-map: VOIP (match-all)
0 packets
Match: access-group name VOIP
police aggregate voip
conform: 0 (packets) exceed: 0 (packets)
NOTE: Policing statistics for a class configured with an aggregate policer are the
same for all classes in the policy-map configured with the same aggregate policer
Class-map: class-default (match-any)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any
police aggregate data
conform: 27796 (packets) exceed: 0 (packets)
NOTE: Policing statistics for a class configured with an aggregate policer are the
same for all classes in the policy-map configured with the same aggregate policer
Service-policy output: uni-out
Class-map: class-default (match-any)
283252 packets
Match: any
Traffic Shaping
Average Rate Traffic Shaping
CIR 11111120 (bps)
Output Queue:
Max queue-limit default threshold: 48
Tail Packets Drop: 426
What is the reason for this error?
Regards
Siva Kondala Rao
07-28-2012 05:17 PM
Are you using aggregate policers inside a policy-map?
Did you check http://www.cisco.com/en/US/docs/switches/metro/me3400/software/release/12.2_46_se/command/reference/cli1.html#wp5049553 ?
The purpose of aggregate policer is sharing the same policer among different classes. I guess you are using two different aggregate policers in the same service-policy.
Could you paste the running config excerpt with the policy-map and interface configuration?
Cheers
Sent from Cisco Technical Support iPad App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide