ME3600 and strange snmp values.

[feableee123]

Hello,

I need to get statistics ( outbound queue drops ) from interface via snmp. When I use cli e.g.

sh interface ge 0/1

Result is:

[...]

Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 28796

[...]

but when walk through  snmp mib (1.3.6.1.4.1.9.2.2.1.1.27) value is: 11460553

Can anybody knows what I do wrong ?

[Alessio Andreoli]

Hi fea,
It really depends on the monitoring system you are using. I had a very similar doubt using SolarWinds just to discover that there were fields which were not clearing out even if I was clearing the interface counters by cli on the network box. You should get some docs about how your application is getting that value.

Hth
Alessio

Sent from Cisco Technical Support iPad App

[feableee123]

Hi Alessio,

I got answer form cisco that there is no snmp mib to measure dropped output queue for 3600. I used mib from 3560 or older platforms - that is why get strange values.

regards,