Metro

What is the command to see running configuration of a service instance in 7600 router.

Dears,We have purchased 7 ME3600X switches from a reseller. We have purchased the following licenses:3ME3600X-I ME3600X   Metro IP Access license7L-ME3600X-LICProduct   Activation Key for ME3600X Series with E delivery (Not received by papers or   by...

Hi,Im having a strange issue with a BGP signalled VPLS on my ME3600.  I'm running 15.3.2(s).The VFI comes up but the virtual circuit stays down with the following error:-SW1.THN-LON#show mpls L2transport vc 501 detailLocal interface: VFI FLVPLS001 vf...

helloI'm having a problem with the implementation of a ASR9010 G8032, I have a ring of switches from another vendor and when I place an debbug get the following error:erp_io [156]: PKT: rcvd Gi0/1/0/3.10 R-APS (NR) [0]: req 00 status 00, node_id dcd2...

I have two 7206 PPPoE BRAS.I need load-balancing pppoe sessions.It is possible? Can be make GLBP?

Hello allWe did implemented a METRO running MPLS L3 VPN on +100 sites. The ring topology connects several ME-3600X-24FS-M -  IOS Version 12.2(52)EY2. The issue we are facing is caused by the fact that most customer connected to the METRO don´t have i...

Hi guys,I have already exploited Metro Ethernet, but I don't understand why auto-negotiation does not support for Ten Giga portsAnyone can help me.Thanks & Best RegardSent from Cisco Technical Support iPad App

Hello.I have a situation in which I am emulating E1 circuits. Im my enviroment I have 2 MWR 2941 (they have the emulation circuit configured, over GRE) at each site connected to a 3750.I looped the E1 interface at one site and I connected a traffic g...

RP/0/RP0/CPU0:xxxxx#sh cgn nat44 xxxx statisticsStatistics summary of NAT44 instance: 'xxxx'Number of active translations: 123001Number of sessions: 26223Translations create rate: 417Translations delete rate: 697Inside to outside forward rate: 16471O...

Hi Folks,I have got Cisco router 2600 XM / 2611XM . What IOS is required for running Cisco IP Transfer point ? Which E1 controller card is required?

HI everyone, I would like to know if any of you know if this is possible to bundle some metroehternet subinterface in the same group. In others words, something similar to a MUltilink interface with FR or ATM. Example I have the config as follow:inte...

Hi,Which IOS for ME 3600X switch better suits production deployment (more features, less known/unknown(by TAC) bugs, etc.) ? What are key differences?The choice is between:15.3-1.S15.2-4.S2wbr,Alex---DAO21-RIPE       

Hello,I need to get statistics ( outbound queue drops ) from interface via snmp. When I use cli e.g.sh interface ge 0/1 Result is: [...] Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 28796[...]but when walk through  snmp mib (1....

We have one customer with one ASA and one 3750 switch in headquater. 6 1801 Routers in 6 branches. All connected via MPLS/BGP provided by ATT. And it was terminated at one port on 3750. We plan to replace that with Metro Ethernet Hub/Spoke topology s...