06-16-2011 12:02 PM
Good day Dear All
I work for an ISP and i want to setup a mpls vpn solution for our customer. We use use Cisco router everywhere and we our Client CPE are form other vendors.
This is my problem
1- I want to setup a cisco 7200 router as BRAS so that our customer can authenticate using PPPoE . Can you please help me to set up router so that our customer CPE can terminate thier PPPOe session and authenticate.
2- We want to set up VPN MPLS for these client without deploying a router at customer site. We want to do this using VCI/VPI for each client. Can anybody help
tx
06-20-2011 01:27 AM
Hi Serge,
I believe you will need Cisco SE to develop the complete solution for this, but if you want to do it by yourself, you will have to go through the following document.
http://www.cisco.com/en/US/docs/ios/12_2t/12_2t13/feature/guide/ftvrfaaa.html
In the End your configurations would be like this:
ip vrf A
...
ip vrf B
..
int lo100
ip vrf forwarding A
ip address .....
int lo101
ip vrf forwarding B
ip address .....
!
int virtual-template1
no ip address
no peer default ip address
ppp authentication chap pap ..
!
ip local pool A-pool
ip local pool B-pool
a Radius profile for a user would then include
Cisco-avpair = "lcp:interface-config#1=ip vrf forwarding A"
Cisco-avpair = "lcp:interface-config#2=ip unnumbered lo100"
Cisco-avpair = "ip:addr-pool=A"
06-28-2011 09:36 PM
Hi Serge
Are you looking for a solution to provide DSL Services to End Customers with using MPLS VPN as Transport so that the CPEs can terminate their PPPoE sessions on the BRAS over the MPLS VPN ?
When you say you want to provide MPLS VPN Services to your customers without using Routers at their end and to utilize VCI/VPI then does it mean that you want to provide MPLS VPN Services to your existing DSL Customers ?
Thanks & Regards
Vaibhava Varma
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide