Hi, I have a question related to Centralized Anycast Gateway for EVPN IRB & Service carving
Referring to the following documentation:
https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k-r7-5/lxvpn/configuration/guide/b-l2vpn-cg-asr9000-75x/configure-evpn-irb.html#Cisco_Concept.dita_6beccf73-29bf-42ff-a6f9-85897af0cbe6
I can not find a way to influence a router to become the designated forwarder (DF)
There is no option to configure service carving (service-carving manual
primary xx secondary xxx) under a virtual access-evi as it is with a physical interface or a bunde-ethernet interface.
It seams like its depending on the router-id as per default.
virtual access-evi
ethernet-segment
identifier type 0 00.00.00.34.34.34.34.34.34
So my question is how to configure service carving when using virtual access-evi for the centralized gateway function, I have tested on ios-xr 7.6.2 on a ASR9902, or if its not supported, is it on the roadmap for future releases?
regards Jonas
