Easy VPN on 1841

[pnoelprov]

Hi,

My name is Patrick Noel

I have a Cisco 1841. I configure a Site to Site VPN on it, which is working fine. I have static and dynamic NAT on it which are working fine also

Now I want to configure it as an Easy VPN Server so I can access my Corporate LAN from the outside.

I set it up. I can connect to the Easy VPN Server, but I cannot ping my internal network. I got either a reply from the server ip address instead of the internal ip that i am pinging or requet timed out.

I should mention that when I set up the Easy VPN Server, it modifies my Nat rules and it prevents me from seeing outside from the servers for which I had a static nat.

[htarra]

You have to bypass NAT for VPN Pool for IP Addresses. Please follow the below URL that explains on how to bypass NAT (Static) with route-map. Configuring this should get your VPN Working.

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080094634.shtml