cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1233
Views
0
Helpful
3
Replies

EVPN VPWS problem

Adrian.X
Level 1
Level 1

Hi

I was wondering if anyone can help me out with a problem regarding vpws.

I have set up a lab and followed the asr920 guide to configure evpn-vpws ios 16.5.1 but can't seem to get it to work.

The VC comes up but I see no next hop or anything.

From what I can tell it should be working but its not.

 

I did however test evpn with vlan-aware and that worked fine but want to know why this wont work.

 

R11#show l2route evpn mac
EVI ETag Prod Mac Address Next Hop(s) Seq Number
----- ---------- ----- -------------- ---------------------------- ----------

 

R11#show l2vpn rib

Local Router ID: 150.1.11.11

+- Origin of entry (i=iBGP/e=eBGP)
| +- Imported without a matching route target (Yes/No)?
| | +- Provisioned (Yes/No)?
| | | +- Stale entry (Yes/No)?
| | | |
v v v v
O I P S VPLS-ID Target ID Next-Hop Route-Target
-+-+-+-+----------------------+---------------+---------------+-------------

 

 

R11#sh l2vpn evpn vpws su
L2VPN EVPN VPWS:
EVIs (point-to-point): 1
Total VCs: 1
1 up, 0 down, 0 admin-down, 0 hot-standby, 0 other
BGP: ASN 100, address-family l2vpn evpn configured
Router ID: 150.1.11.11

 

Regards

Adrian

3 Replies 3

Adrian.X
Level 1
Level 1
UPDATE:

Now after I configure R7 to peer with R11 I can see the next hop but not with route reflector

R11#sh l2route evpn ead
*Apr 28 22:14:08.887: %SYS-5-CONFIG_I: Configured from console by vty0 (155.1.108.10) per-evi
EVI ETag Prod ESI Next Hop(s) Label
----- ---------- ----- ------------------------ ---------------------------- -------
11 100 L2VPN N/A N/A 16
11 100 BGP 0000.0000.0000.0000.0000 150.1.7.7 24

R11#

But still no communication between the 2 pc's

R7#sh l2vpn evpn vpws vc all det
EVPN name: vc11, state: up, type: point-to-point
EVPN ID: 11
VPWS Service Instance ID: Source 100, Target 100
Labels: Local 24, Remote 16
Next Hop Address: 150.1.11.11
Associated member interface Gi2 up, Gi2:11 status is up
Dataplane:
SSM segment/switch IDs: 4116/4108 (used), PWID: 1
Rx Counters
0 input transit packets, 0 bytes
6387 drops
Tx Counters
291 output transit packets, 43152 bytes
0 drops
21 VC FSM state transitions, Last 10 shown
DpDn: Est -> Act, Tue Apr 28 20:43:21.945 (10:17:28 ago)
RemDn: Act -> RemWait, Tue Apr 28 20:43:26.932 (10:17:23 ago)
RemUp: RemWait -> Act, Wed Apr 29 05:57:20.511 (01:03:30 ago)
DpUp: Act -> Est, Wed Apr 29 05:57:20.532 (01:03:29 ago)
RemDn: Est -> RemWait, Wed Apr 29 06:29:26.043 (00:31:24 ago)
RemUp: RemWait -> Act, Wed Apr 29 06:30:48.089 (00:30:02 ago)
DpUp: Act -> Est, Wed Apr 29 06:30:48.108 (00:30:02 ago)
RemDn: Est -> RemWait, Wed Apr 29 06:57:46.139 (00:03:04 ago)
RemUp: RemWait -> Act, Wed Apr 29 06:57:46.161 (00:03:04 ago)
DpUp: Act -> Est, Wed Apr 29 06:57:46.179 (00:03:04 ago)

R7#

Adrian.X
Level 1
Level 1

Anyone?

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: