cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
516
Views
5
Helpful
1
Replies

Hidden MPLS Interfaces

spremkumar
Level 9
Level 9

Hi Folks

when i issue show mpls interfaces hidden on my 7606 boxes m getting the following o/p but donno whts meant by this ,though we havent created any VRFs i m getting the below pasted o/p.

i tried cheking out the command lookup tool for the options avl but no luck :-(

i m getting the same o/p in all my boxes installed over here with some of them displaying some other vlan nos...

can somone throw some lite on this ?

mi01-rt01#sh mpls interfaces hidden

Interface VRF_0_vlan4079:

IP labeling enabled (ldp)

LSP Tunnel labeling not enabled

BGP tagging not enabled

MPLS operational

Optimum Switching Vectors:

IP to MPLS Feature Vector

MPLS Feature Vector

Fast Switching Vectors:

IP to MPLS Fast Feature Switching Vector

MPLS Feature Vector

MTU = 1500

Interface VRF_0_vlan4080:

IP labeling enabled (ldp)

LSP Tunnel labeling not enabled

BGP tagging not enabled

MPLS operational

Optimum Switching Vectors:

IP to MPLS Feature Vector

MPLS Feature Vector

Fast Switching Vectors:

IP to MPLS Fast Feature Switching Vector

MPLS Feature Vector

MTU = 1500

mi01-rt01#

regds

1 Reply 1

Harold Ritter
Cisco Employee
Cisco Employee

These are vlans that have been allocated for internal use only. It shouldn't be a problem.

Hope this helps,

Harold Ritter
Sr Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México
Paseo de la Reforma 222
Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México