Hi Folks
when i issue show mpls interfaces hidden on my 7606 boxes m getting the following o/p but donno whts meant by this ,though we havent created any VRFs i m getting the below pasted o/p.
i tried cheking out the command lookup tool for the options avl but no luck :-(
i m getting the same o/p in all my boxes installed over here with some of them displaying some other vlan nos...
can somone throw some lite on this ?
mi01-rt01#sh mpls interfaces hidden
Interface VRF_0_vlan4079:
IP labeling enabled (ldp)
LSP Tunnel labeling not enabled
BGP tagging not enabled
MPLS operational
Optimum Switching Vectors:
IP to MPLS Feature Vector
MPLS Feature Vector
Fast Switching Vectors:
IP to MPLS Fast Feature Switching Vector
MPLS Feature Vector
MTU = 1500
Interface VRF_0_vlan4080:
IP labeling enabled (ldp)
LSP Tunnel labeling not enabled
BGP tagging not enabled
MPLS operational
Optimum Switching Vectors:
IP to MPLS Feature Vector
MPLS Feature Vector
Fast Switching Vectors:
IP to MPLS Fast Feature Switching Vector
MPLS Feature Vector
MTU = 1500
mi01-rt01#
regds
