06-11-2021 12:39 AM - edited 06-11-2021 12:45 AM
Hey folks,
I was trying to follow the configuration guide at: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipmulti_mvpn/configuration/12-2sx/imc-mvpn-12-2sx-book/imc_cfg_mc_vpn_sup.pdf on how to configure InterAS MVPN between PEs in different ASes (it is assumed VPNv4 works between the PEs as a prerequisite).
I am configuring MVPN between AS100 and AS300 and using Option B (VPNv4 between ASBRs):
Topology
Configurations
Each AS has its own RR internally running VPNv4/6 + MDT, at least the PE terminating the VRF (yellow_red) and the ASBR run iBGP and have those AFI activated.
The two ASBRs run eBGP VPNv4/6 + MDT and use 'retain route-target all' as one would usually do in option B unless the ASBR was also the RR.
Each PE terminates a yellow_red VRF with import/export RT 2:2 and RD of 1:1 (which i had to make unique given in this case to make routes look part of the same VPN (not sure why that is).
Multicast configuration is pretty standard. I am using vrf loopbacks rather than actual client to join a group on 9k1 and play the BSR role on 9k2.
9k2 (PE AS100)
router bgp 100 address-family ipv4 unicast allocate-label all ! address-family vpnv4 unicast ! address-family vpnv6 unicast ! address-family ipv4 mdt ! ! neighbor 16.16.16.16 remote-as 100 update-source Loopback0 address-family ipv4 labeled-unicast route-policy color in ! address-family vpnv4 unicast route-policy color in ! address-family vpnv6 unicast route-policy color in ! address-family ipv4 mdt next-hop-self ! ! vrf yellow_red rd 1:1 address-family ipv4 unicast redistribute connected ! address-family ipv6 unicast redistribute connected !
multicast-routing
address-family ipv4
mdt source Loopback0
interface all enable
!
vrf yellow_red
address-family ipv4
rate-per-route
interface all enable
accounting per-prefix
mdt default ipv4 232.0.0.1
mdt data 232.0.1.0/24
!
router pim
vrf yellow_red
address-family ipv4
rpf-vector
bsr candidate-bsr 102.102.102.102 hash-mask-len 30 priority 1
bsr candidate-rp 102.102.102.102 priority 192 interval 60
!
9k1 (PE AS300)
router bgp 300 address-family ipv4 unicast allocate-label all ! address-family vpnv4 unicast ! address-family vpnv6 unicast ! address-family ipv4 mdt ! neighbor 4.4.4.4 remote-as 300 update-source Loopback0 address-family ipv4 labeled-unicast ! address-family vpnv4 unicast ! address-family vpnv6 unicast ! address-family ipv4 mdt next-hop-self ! vrf yellow_red rd 1:1 address-family ipv4 unicast redistribute connected ! address-family ipv6 unicast redistribute connected ! multicast-routing address-family ipv4 mdt source Loopback0 interface all enable ! vrf yellow_red address-family ipv4 rate-per-route interface all enable accounting per-prefix mdt default ipv4 232.0.0.1 mdt data 232.0.1.0/24 ! router pim vrf yellow_red address-family ipv4 rpf-vector !
router igmp
vrf yellow_red
interface Loopback101
join-group 224.7.7.7
!
9k3 (ASBR AS100)
router bgp 100 address-family ipv4 unicast allocate-label all ! address-family vpnv4 unicast retain route-target all ! address-family vpnv6 unicast ! address-family ipv4 mdt ! neighbor 16.16.16.16 remote-as 100 update-source Loopback0 address-family ipv4 labeled-unicast next-hop-self ! address-family vpnv4 unicast next-hop-self ! address-family vpnv6 unicast next-hop-self ! address-family ipv4 mdt next-hop-self ! ! neighbor 146.204.35.2 remote-as 300 address-family vpnv4 unicast route-policy PASS in route-policy PASS out ! address-family vpnv6 unicast route-policy PASS in route-policy PASS out ! address-family ipv4 mdt route-policy PASS in route-policy PASS out ! ! vrf yellow_red rd 103.103.103.103:1 address-family ipv4 unicast redistribute connected ! address-family ipv6 unicast redistribute connected ! multicast-routing address-family ipv4 interface GigabitEthernet0/0/0/0.35 enable ! mdt source Loopback0 interface all enable !
iosxr5 (ASBR AS300)
router bgp 300 address-family ipv4 unicast allocate-label all ! address-family vpnv4 unicast retain route-target all ! address-family vpnv6 unicast retain route-target all ! address-family ipv4 mdt ! neighbor 4.4.4.4 remote-as 300 update-source Loopback0 address-family ipv4 labeled-unicast next-hop-self ! address-family vpnv4 unicast next-hop-self ! address-family vpnv6 unicast next-hop-self ! address-family ipv4 mdt next-hop-self ! ! neighbor 146.204.35.1 remote-as 100 address-family vpnv4 unicast route-policy PASS in route-policy PASS out ! address-family vpnv6 unicast route-policy PASS in route-policy PASS out ! address-family ipv4 mdt route-policy PASS in route-policy PASS out ! multicast-routing address-family ipv4 interface GigabitEthernet0/0/0/0.35 enable ! mdt source Loopback0 interface all enable ! !
Problem
Whilst I can see BGP mdt AFi works and prefixes being exchanged (P-PIM), I can't really understand what is going on with the C-PIM and vrf yellow_red, which, does njot seem to see anything, not BSR and RP mapping nor tunnel neighborship or any topology information:
9k2
RP/0/RP0/CPU0:iosxr-9k-2#sh pim vrf yellow_red nei Neighbor Address Interface Uptime Expires DR pri Flags 222.222.222.222* Loopback102 00:11:39 00:01:41 1 (DR) B P E 102.102.102.102* mdtyellow/red 2d00h 00:01:26 1 (DR) P RP/0/RP0/CPU0:iosxr-9k-2#sh pim vrf yellow_red int Fri Jun 11 07:42:48.938 UTC PIM interfaces in VRF yellow_red Address Interface PIM Nbr Hello DR DR Count Intvl Prior 222.222.222.222 Loopback102 on 1 30 1 this system 102.102.102.102 mdtyellow/red on 1 30 1 this system
RP/0/RP0/CPU0:iosxr-9k-2#sh pim topology Fri Jun 11 07:28:19.706 UTC (*,224.0.1.40) DM Up: 2d00h RP: 0.0.0.0 JP: Null(never) RPF: Null,0.0.0.0 Flags: LH DSS Loopback0 2d00h off LI II LH (101.101.101.101,232.0.0.1)SPT SSM Up: 23:51:12 JP: Join(00:00:40) RPF: GigabitEthernet0/0/0/0.36,204.183.215.2 Flags: Loopback0 23:51:12 fwd LI LH (102.102.102.102,232.0.0.1)SPT SSM Up: 2d00h JP: Join(00:00:10) RPF: Loopback0,102.102.102.102* Flags: Loopback0 2d00h fwd LI LH
RP/0/RP0/CPU0:iosxr-9k-2#sh pim vrf yellow_red topology
Fri Jun 11 07:28:57.579 UTC
No PIM topology table entries found. <-- nothing
RP/0/RP0/CPU0:iosxr-9k-2#sh bgp ipv4 mdt vrf yellow_red Route Distinguisher: 1:1 *>i101.101.101.101/96 103.103.103.103 100 0 300 i <-- 9k1 mdt prefix being received *> 102.102.102.102/96 0.0.0.0 0 i
9k1
RP/0/RP0/CPU0:iosxr-9k-1#sh pim vrf yellow_red neigh Neighbor Address Interface Uptime Expires DR pri Flags 111.111.111.111* Loopback101 2d01h 00:01:17 1 (DR) B P E 101.101.101.101* mdtyellow/red 2d00h 00:01:25 1 (DR) P
RP/0/RP0/CPU0:iosxr-9k-1#sh pim vrf yellow_red interfa Fri Jun 11 07:41:06.599 UTC PIM interfaces in VRF yellow_red Address Interface PIM Nbr Hello DR DR Count Intvl Prior 111.111.111.111 Loopback101 on 1 30 1 this system 101.101.101.101 mdtyellow/red on 1 30 1 this system
RP/0/RP0/CPU0:iosxr-9k-1#sh pim vrf yellow_red rp mapping Fri Jun 11 07:33:19.417 UTC PIM Group-to-RP Mappings RP/0/RP0/CPU0:iosxr-9k-1#sh pim vrf yellow_red topology (*,224.7.7.7) SM Up: 23:54:27 RP: 0.0.0.0 <-- the group joined on lo101 locally JP: Join(never) RPF: Null,0.0.0.0 Flags: LH Loopback101 23:54:27 fwd LI II LH RP/0/RP0/CPU0:iosxr-9k-1#sh pim topology (*,224.0.1.40) DM Up: 2d00h RP: 0.0.0.0 JP: Null(never) RPF: Null,0.0.0.0 Flags: LH DSS Loopback0 2d00h off LI II LH
(101.101.101.101,232.0.0.1)SPT SSM Up: 2d00h JP: Join(00:00:45) RPF: Loopback0,101.101.101.101* Flags: Loopback0 2d00h fwd LI LH (102.102.102.102,232.0.0.1)SPT SSM Up: 23:55:45 JP: Join(00:00:45) RPF: GigabitEthernet0/0/0/0.522,154.190.143.1 Flags: Loopback0 23:55:45 fwd LI LH RP/0/RP0/CPU0:iosxr-9k-1#sh pim vrf yellow_red rp mapping Route Distinguisher: 1:1 *> 101.101.101.101/96 0.0.0.0 0 i *>i102.102.102.102/96 5.5.5.5 100 0 100 i
Questions
Thanks, L.
06-13-2021 10:07 PM
Signal boost
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide