Hello,
I have the following configuration on IOS-XRv 5.2.0:
vrf VRF-C
address-family ipv4 unicast
import route-target
65000:1003
!
export route-target
65000:1003
!
!
!
router static
vrf VRF-C
address-family ipv4 unicast
0.0.0.0/0 Null0
172.0.0.0/8 Null0
!
!
router bgp 65001
neighbor 172.16.10.11
remote-as 65001
update-source Loopback0
address-family vpnv4 unicast
soft-reconfiguration inbound always
!
!
vrf VRF-C
rd 172.16.10.102:103
address-family ipv4 unicast
redistribute connected
redistribute static
!
!
!
===================================
Both static routes are installed in the VRF:
RP/0/0/CPU0:03-ASBR2#show route vrf VRF-C static
S* 0.0.0.0/0 is directly connected, 00:05:32, Null0
S 172.0.0.0/8 is directly connected, 00:06:00, Null0
But only the specific one is advertised via MP-IBGP:
RP/0/0/CPU0:03-ASBR2#show bgp vpnv4 unicast rd 172.16.10.102:103 advertised neighbor 172.16.10.11 summary
Network Next Hop From AS Path
Route Distinguisher: 172.16.10.102:103
172.0.0.0/8 172.16.10.102 Local ?
Processed 1 prefixes, 1 paths
===================================
The question is: why is the default 0/0 route not advertised, and how can I configure the box so that it's advertised?
Thanks,
Ato