ip nat inside source list VRF

[palmanet2007]

Hi,

I have a Cisco 7204VXR with a NPE175 and 64 MG. I am using the IOS c7200-js-mz.122-32.bin. My problem is that I cannot form the VRF in "ip nat inside source list 2 interface loopback 2 vrf XXXXX overload". The commando vrf does not appear to me. An example:

interface Loopback2

ip vrf forwarding PRUEBA

ip address 10.10.10.10 255.255.255.255

Cisco7200(config)#ip nat inside source list 2 interface loopback 2 vrf PRUEBA overload

^

% Invalid input detected at '^' marker.

Cisco7200(config)#ip nat inside source list 2 interface loopback 2 ?

overload Overload an address translation

<cr>

So that I cannot form the VRF?

I must have another version of IOS?

Cheers

[mohammedmahmoud]

Hi,

You are right, your IOS doesn't support VRF Aware NAT, please use Cisco Feature Navigator to find the appropriate IOS:

http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp

HTH,

Mohammed Mahmoud.

[palmanet2007]

Hi, Thanks for your aid.

The problem is that I only have 64 Mg and all the IOS require 128.

you know some IOS that has supported VRF Aware NAT and it only needs 64 Mg to work?

Cheers

[mohammedmahmoud]

Hi Eusebio,

Unfortunately you need at least 128M to support this feature on your platform.

HTH,

Mohammed Mahmoud.