cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
722
Views
0
Helpful
1
Replies

Issue with MPLS QOS Diffserv

Adnan Khan
Level 4
Level 4

Hi,

I have created two scenarios. 1) with out Qos on L3 MPLS VPN and 2) with QOS configured. I have configured IP SLA to to test if QOS gives better out put for voice and video traffic as comare to without QOS scenario on GNS3. but i am getting opposit results. 

I have attached the output collected with and with out QOS implemented. You can see the MOS value is higher in without QOS and Jitters are lower. I have attached IP SLA config also. During collecting stats I had run ping from R6 to R1 with size 1500 and repeat count 100000 to put some load on the link. I have uploded my GNS3 files on FTP and links are below.


You can download my GNS topology from below link.

IOS used (c7200-adventerprisek9-mz.124-24.T3)

http://www.4shared.com/rar/_td44dCh/MPLSVPN_basic_qos5.html?

http://www.4shared.com/rar/cbyIfLMA/MPLSVPN_basic_qos3.html?

1 Reply 1

Adnan Khan
Level 4
Level 4

Need help