02-09-2009 04:29 AM
Dear all,
I wanted to know why do we enable sparse mode in SP cloud when we are using SSM also. (ip ssm default). Since SSM dosent need any RP then why we need the sparse mode together to be used with SSM in the SP cloud.
Solved! Go to Solution.
02-09-2009 05:58 AM
you can check the mvpn discussion. Hritter answered " SSM uses PIM-SM with a few modifications. RFC4601 section 4.8.1 defines the modifications to the PIM SM protocol to support SSM. Beyond these modifications, all normal PIM SM functionality and messages are required, including periodic join messages.
http://tools.ietf.org/html/rfc4601 "
regards
shivlu jain
02-09-2009 05:58 AM
you can check the mvpn discussion. Hritter answered " SSM uses PIM-SM with a few modifications. RFC4601 section 4.8.1 defines the modifications to the PIM SM protocol to support SSM. Beyond these modifications, all normal PIM SM functionality and messages are required, including periodic join messages.
http://tools.ietf.org/html/rfc4601 "
regards
shivlu jain
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide