Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am doing a testing with CESoPSN PWE3 where in my local E1 is getting heavy underruns and overruns counters. But someone suggested me to increase the jitter buffer size. I don't know why he has suggested this and whats the root cause of jitter buffe...
Hi AllI have posted the working mechanism of DH algorithm. Please share your experience.http://www.mplsvpn.info/2010/05/diffie-hellmandh-shared-key-exchange.htmlregardsShivlu Jainhttp://www.mplsvpn.info
If the packets are fragmented in ingress and QOS is used, Does the QOS will be maintained after fragmentation. Like in GRE we have QOS pre classify to preserve the bits.regardsshivlu jain
Dear AllI am binding the policy in ASA 5500, everthing works fine except we are not able to download the mail attachment from MSN.The ASA OS Version is 8.2(1).regex domainlist2 ".*sandai.*"regex domainlist4 ".*megaupload.*"regex domainlist5 ".*sends...
labels are generated for two things:-1. one for igp routes2. second for vpnv4 routesto reach end to end we need labels for the remote PE which is only possible with the routing protocol. Otherwise its not possible.regardsShivlu Jainhttp://www.mplsvpn...
Yes you are right you can use; for every customer you can use the same area; this is the main advantage of using MPLS. For domain id you can check the post which tells about to use the domain-id for receiving routes from same customer. By default dom...
Loopguard:- Unidirectional link failures may cause a root port or alternate port to become designated as root if BPDUs are absent. Some software failures may introduce temporary loops in the network. The loop guard feature checks if a root port or an...
Also for VPLS your cisco router must have sup 720, if you are having a routers like 7200 the best is to provide the l3 mpls.regardsShivlu Jainhttp://www.mplsvpn.info
Hi MaheshAs per your suggestion, when customer will add a different vlan in that case a new ip subnet is required. But as per the requirement a same broadcast domain need to be extended. Please correct me if i am wrong.regardsShivlu Jainhttp://www.mp...