05-10-2007 09:25 AM
I am trying to find out wich feature set supports NAT on a VRF for the 7606 chassis with supervisor module WS-SUP720-3BXL.
thanx
05-10-2007 09:39 AM
This is not supported on the 7600. The alternative is to use a FWSM.
Hope this helps,
05-11-2007 04:06 AM
That is not really the answer I was hoping for, installing a FWSM is not really an alternative, what is the road map to support this on the cisco 7600?
05-22-2007 05:45 AM
Hi,
Using FWSM is definitely an alternate where you dedicate an single instance of vFW to perform NAT for a particular VRF. If this is not acceptable to you, you may consider other platforms like 7200 that can deliver a solution today for this.
However, for all potential roadmap related discussion I would recommend you to directly get in touch with your account team since this forum may not be the right place to discuss such things.
Cheers,
12-14-2017 02:12 PM
Is this specific to the supervisor that is listed or only supported on 7600 series routers with a FWSM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide