07-12-2013 04:32 AM
Hi Folks,
I am trying to simulate Layer3 VPN between Juniper J2320 and Cisco 2611. However it seems that Juniper router is not sending VPN routes to Cisco router. I have verified the LDP, BGP and OSPF they are all operational. The attached document has got the configuration of Juniper and Cisco. Please help me out to fix this. This set up is in my home lab. PLEASE REFER ATTACHED DOCUMENT.
show configuration
## Last commit: 2013-07-12 10:22:37 UTC by root
version 10.0R4.7;
system {
root-authentication {
encrypted-password "$1$UaKIM2Vv$cLACzAalf5.QhCdfoqmNZ0"; ## SECRET-DATA
}
services {
ssh;
telnet;
web-management {
http {
interface ge-0/0/0.0;
}
}
}
syslog {
user * {
any emergency;
}
file messages {
any any;
authorization info;
}
---(more)---
file interactive-commands {
interactive-commands any;
}
}
license {
autoupdate {
url https://ae1.juniper.net/junos/key_retrieval;
}
}
}
interfaces {
ge-0/0/0 {
unit 0;
}
fe-0/0/1 {
unit 0;
}
ge-0/0/1 {
unit 0 {
family inet {
address 200.200.200.1/24;
}
}
---(more 33%)---
}
ge-0/0/2 {
unit 0 {
family inet {
address 220.225.33.1/24;
}
family mpls;
}
}
lo0 {
unit 0 {
family inet {
address 97.9.15.1/24;
}
}
}
}
routing-options {
router-id 97.9.15.1;
autonomous-system 200;
}
protocols {
mpls {
---(more 49%)---
interface ge-0/0/2.0;
}
bgp {
group SESSION-ROUTER2600 {
type internal;
peer-as 200;
neighbor 97.9.15.2;
}
}
ospf {
area 0.0.0.0 {
interface ge-0/0/2.0;
interface lo0.0;
}
}
ldp {
interface ge-0/0/2.0;
}
}
policy-options {
policy-statement London_Export {
term 1 {
from protocol static;
---(more 66%)---
then {
community add London;
accept;
}
}
term 2 {
then reject;
}
}
policy-statement London_Import {
term 1 {
from {
protocol bgp;
community London;
}
then accept;
}
term 2 {
then reject;
}
}
community London members target:200:200;
}
---(more 82%)---
security {
forwarding-options {
family {
mpls {
mode packet-based;
}
}
}
}
routing-instances {
London {
instance-type vrf;
interface ge-0/0/1.0;
route-distinguisher 200:200;
vrf-import London_Import;
vrf-export London_Export;
vrf-target target:200:200;
routing-options {
static {
route 0.0.0.0/0 next-hop 200.200.200.2;
}
}
}
---(more 99%)---
}
root> show route table bgp.l3vpn.0
error: No routing tables matching specification.
root> show route table inet.3
inet.3: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
97.9.15.2/32 *[LDP/9] 07:08:08, metric 1
> to 220.225.33.2 via ge-0/0/2.0
show route table inet.3
inet.3: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
97.9.15.2/32 *[LDP/9] 07:08:08, metric 1
> to 220.225.33.2 via ge-0/0/2.0
root> show route table mpls.0
mpls.0: 5 destinations, 5 routes (5 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
0 *[MPLS/0] 07:28:07, metric 1
Receive
1 *[MPLS/0] 07:28:07, metric 1
Receive
2 *[MPLS/0] 07:28:07, metric 1
Receive
299776 *[LDP/9] 07:08:55, metric 1
> to 220.225.33.2 via ge-0/0/2.0, Pop
299776(S=0) *[LDP/9] 07:08:55, metric 1
> to 220.225.33.2 via ge-0/0/2.0, Pop
root> show route table inet.0
inet.0: 6 destinations, 6 routes (6 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
97.9.15.0/24 *[Direct/0] 10:06:49
> via lo0.0
97.9.15.1/32 *[Local/0] 10:06:49
Local via lo0.0
97.9.15.2/32 *[OSPF/10] 10:18:26, metric 2
> to 220.225.33.2 via ge-0/0/2.0
220.225.33.0/24 *[Direct/0] 10:19:12
> via ge-0/0/2.0
220.225.33.1/32 *[Local/0] 10:42:15
Local via ge-0/0/2.0
224.0.0.5/32 *[OSPF/10] 10:42:44, metric 1
MultiRecv
root> show route table inet.3
inet.3: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
97.9.15.2/32 *[LDP/9] 07:10:21, metric 1
> to 220.225.33.2 via ge-0/0/2.0
root>
Cisco 2611 Configuration
show run
Building configuration...
Current configuration : 1830 bytes
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Hanuman
boot-start-marker
boot-end-marker
enable secret 5 $1$RMZ5$60IY29i1BBont51p.5gPM/
enable password password
no network-clock-participate slot 1
no network-clock-participate wic 0
no aaa new-model
ip subnet-zero
ip cef
--More--
no ip domain lookup
ip vrf London
rd 200:200
route-target export 200:200
route-target import 200:200
ip audit po max-events 100
mpls label protocol ldp
tag-switching tdp router-id Loopback0
interface Loopback0
ip address 97.9.15.2 255.255.255.255
interface FastEthernet0/0
ip address 220.225.33.2 255.255.255.0
duplex auto
speed auto
tag-switching ip
no cdp enable
interface FastEthernet0/1
ip vrf forwarding London
ip address 10.255.8.1 255.255.255.0
duplex auto
speed auto
--More-- no cdp enable
router ospf 200
router-id 97.9.15.2
log-adjacency-changes
network 97.9.15.0 0.0.0.255 area 0
network 220.225.33.0 0.0.0.255 area 0
router bgp 200
bgp log-neighbor-changes
neighbor 97.9.15.1 remote-as 200
neighbor 97.9.15.1 update-source Loopback0
address-family ipv4
no neighbor 97.9.15.1 activate
no auto-summary
no synchronization
exit-address-family
address-family vpnv4
neighbor 97.9.15.1 activate
neighbor 97.9.15.1 send-community both
exit-address-family
--More--
address-family ipv4 vrf London
redistribute static
no auto-summary
no synchronization
exit-address-family
ip classless
ip route vrf London 10.255.8.0 255.255.255.0 10.255.8.2
no ip http server
no ip http secure-server
dialer-list 1 protocol ip permit
dialer-list 1 protocol ipx permit
no cdp run
line con 0
line aux 0
line vty 0 4
exec-timeout 35791 0
password password
login
end
Hanuman#show ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-ADVENTERPRISEK9-M), Version 12.3(24), RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Thu 18-Oct-07 14:27 by stshen
Image text-base: 0x80008098, data-base: 0x82050B80
ROM: System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)
Hanuman uptime is 10 hours, 1 minute
System returned to ROM by power-on
System image file is "flash:c2600-adventerprisek9-mz.123-24.bin"
cisco 2611XM (MPC860P) processor (revision 0x301) with 126976K/4096K bytes of memory.
Processor board ID FOC08375E4Q (1102326369)
M860 processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
2 FastEthernet/IEEE 802.3 interface(s)
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
Configuration register is 0x2142
Hanuman#sh mpls forwarding-table 97.9.15.1
Local Outgoing Prefix Bytes tag Outgoing Next Hop
tag tag or VC or Tunnel Id switched interface
16 Pop tag 97.9.15.1/32 0 Fa0/0 220.225.33.1
Hanuman#sh ip bgp vpnv4 vrf London 97.9.15.1
% Network not in table
Solved! Go to Solution.
07-17-2013 06:33 AM
Hi,
Do you do extended or regular ping? If you do regular ping, the egress interface ip address is used as the source of the ping packets. This would be an issue in your case as only the cisco side redistributes the PE-CE link.
You either need to do an extended ping using one of the loopback interface ip addresses as the source or redistribute the PE-CE link on the juniper side as well as follow:
policy-options {
policy-statement London_Export {
term 1 {
from protocol static direct;
then {
community add London;
accept;
}
}
term 2 {
then reject;
}
}
You might also want to configure vrf-table-label under the routing instance London.
Regards
07-12-2013 05:47 AM
Hi,
The first thing I note, is that the family inet-vpn is not configured for the ibgp session on the Juniper side, hence you are getting the following error message:
root> show route table bgp.l3vpn.0
error: No routing tables matching specification.
Regards
07-16-2013 05:25 AM
Hi Harold ,
Here is the configuration of Juniper and Cisco. It seems that VPN routes are not being exchanged between these folks. Please help me out.
root@IBHANAN# run show route table inet.3
inet.3: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
97.9.15.2/32 *[LDP/9] 00:01:31, metric 1
> to 220.225.33.2 via ge-0/0/2.0
root@IBHANAN# run show route table inet.0
inet.0: 6 destinations, 6 routes (6 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
97.9.15.0/24 *[Direct/0] 00:46:28
> via lo0.0
97.9.15.1/32 *[Local/0] 00:46:28
Local via lo0.0
97.9.15.2/32 *[OSPF/10] 00:19:19, metric 2
> to 220.225.33.2 via ge-0/0/2.0
220.225.33.0/24 *[Direct/0] 00:20:05
> via ge-0/0/2.0
220.225.33.1/32 *[Local/0] 00:46:00
Local via ge-0/0/2.0
224.0.0.5/32 *[OSPF/10] 00:46:29, metric 1
MultiRecv
root@IBHANAN> show route table mpls.0
mpls.0: 6 destinations, 6 routes (6 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
0 *[MPLS/0] 00:48:15, metric 1
Receive
1 *[MPLS/0] 00:48:15, metric 1
Receive
2 *[MPLS/0] 00:48:15, metric 1
Receive
299776 *[LDP/9] 00:20:51, metric 1
> to 220.225.33.2 via ge-0/0/2.0, Pop
299776(S=0) *[LDP/9] 00:20:51, metric 1
> to 220.225.33.2 via ge-0/0/2.0, Pop
299792 *[VPN/170] 00:20:41
> to 200.200.200.2 via ge-0/0/1.0, Pop
root@IBHANAN> show ldp database
Input label database, 97.9.15.1:0--97.9.15.2:0
Label Prefix
17 97.9.15.0/24
16 97.9.15.1/32
3 97.9.15.2/32
3 220.225.33.0/24
Output label database, 97.9.15.1:0--97.9.15.2:0
Label Prefix
3 97.9.15.1/32
299776 97.9.15.2/32
root@IBHANAN> show ldp database
Input label database, 97.9.15.1:0--97.9.15.2:0
Label Prefix
17 97.9.15.0/24
16 97.9.15.1/32
3 97.9.15.2/32
3 220.225.33.0/24
Output label database, 97.9.15.1:0--97.9.15.2:0
Label Prefix
3 97.9.15.1/32
299776 97.9.15.2/32
root@IBHANAN> show ldp neighbor
Address Interface Label space ID Hold time
220.225.33.2 ge-0/0/2.0 97.9.15.2:0 12
---------------------------------------------------------------------------
SHOW RUN
----------------------------------------------------------------------------
root@IBHANAN# run show configuration
## Last commit: 2013-07-15 23:40:27 IST by root
version 10.0R4.7;
interfaces {
ge-0/0/0 {
unit 0;
}
fe-0/0/1 {
unit 0;
}
ge-0/0/1 {
unit 0 {
family inet {
address 200.200.200.1/24;
}
}
}
ge-0/0/2 {
unit 0 {
family inet {
address 220.225.33.1/24;
}
family mpls;
}
}
lo0 {
unit 0 {
family inet {
address 97.9.15.1/24;
}
}
}
}
routing-options {
router-id 97.9.15.1;
autonomous-system 200;
}
protocols {
mpls {
interface ge-0/0/2.0;
}
bgp {
group SESSION-ROUTER2600 {
type internal;
family inet-vpn {
unicast;
}
peer-as 200;
neighbor 97.9.15.2;
}
}
ospf {
area 0.0.0.0 {
interface ge-0/0/2.0;
interface lo0.0;
}
}
ldp {
interface ge-0/0/2.0;
interface all;
}
}
policy-options {
policy-statement London_Export {
term 1 {
from protocol static;
then {
community add London;
accept;
}
}
term 2 {
then reject;
}
}
policy-statement London_Import {
term 1 {
from {
protocol bgp;
community London;
}
then accept;
}
term 2 {
then reject;
}
}
community London members target:200:200;
}
security {
forwarding-options {
family {
mpls {
mode packet-based;
}
}
}
}
routing-instances {
London {
instance-type vrf;
interface ge-0/0/1.0;
route-distinguisher 200:200;
vrf-import London_Import;
vrf-export London_Export;
vrf-target target:200:200;
routing-options {
static {
route 100.100.100.1/32 next-hop 200.200.200.2;
}
}
}
}
[edit]
root@IBHANAN#
-------------------------------------------------------------------------
CISCO
-------------------------------------------------------------------------
Hanuman>
Hanuman>en
Password:
Password: sj show run
Building configuration...
Current configuration : 1707 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Hanuman
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$RMZ5$60IY29i1BBont51p.5gPM/
enable password password
!
no network-clock-participate slot 1
no network-clock-participate wic 0
no aaa new-model
ip subnet-zero
ip cef
!
!
--More-- !
no ip domain lookup
ip vrf London
rd 200:200
route-target export 200:200
route-target import 200:200
!
ip audit po max-events 100
mpls label protocol ldp
tag-switching tdp router-id Loopback0
!
!
!
!
!
!
!
!
!
!
!
!
!
--More-- !
!
!
!
!
!
!
!
interface Loopback0
ip address 97.9.15.2 255.255.255.255
!
interface FastEthernet0/0
ip address 220.225.33.2 255.255.255.0
duplex auto
speed auto
tag-switching ip
no cdp enable
!
interface FastEthernet0/1
ip vrf forwarding London
ip address 10.255.8.1 255.255.255.0
shutdown
duplex auto
--More-- speed auto
no cdp enable
!
router ospf 200
router-id 97.9.15.2
log-adjacency-changes
network 97.9.15.0 0.0.0.255 area 0
network 220.225.33.0 0.0.0.255 area 0
!
router bgp 200
no synchronization
bgp log-neighbor-changes
neighbor 97.9.15.1 remote-as 200
neighbor 97.9.15.1 update-source Loopback0
no auto-summary
!
address-family vpnv4
neighbor 97.9.15.1 activate
neighbor 97.9.15.1 send-community both
exit-address-family
!
address-family ipv4 vrf London
redistribute static
--More-- no auto-summary
no synchronization
exit-address-family
!
ip classless
!
no ip http server
no ip http secure-server
!
dialer-list 1 protocol ip permit
dialer-list 1 protocol ipx permit
no cdp run
!
!
!
!
!
!
!
!
!
line con 0
line aux 0
--More-- line vty 0 4
exec-timeout 35791 0
password password
login
!
!
end
Hanuman#show mpl
Hanuman#show mpls for
Hanuman#show mpls forwarding-table ?
A.B.C.D Destination prefix
detail Detailed information
interface Match outgoing interface
labels Match label values
lsp-tunnel LSP Tunnel id
next-hop Match next hop neighbor
vrf Show entries for a VPN Routing/Forwarding instance
| Output modifiers
Hanuman#show mpls forwarding-table vrf
Hanuman#show mpls forwarding-table vrf Lon
Hanuman#show mpls forwarding-table vrf London
Local Outgoing Prefix Bytes tag Outgoing Next Hop
tag tag or VC or Tunnel Id switched interface
Hanuman#show show mpls forwarding-table vrf London run mpls forwarding-table vrf London ?
A.B.C.D Destination prefix
detail Detailed information
interface Match outgoing interface
labels Match label values
lsp-tunnel LSP Tunnel id
next-hop Match next hop neighbor
vrf Show entries for a VPN Routing/Forwarding instance
| Output modifiers
Hanuman#show mpls forwarding-table det
Hanuman#show mpls forwarding-table detail
Local Outgoing Prefix Bytes tag Outgoing Next Hop
tag tag or VC or Tunnel Id switched interface
16 Pop tag 97.9.15.1/32 0 Fa0/0 220.225.33.1
MAC/Encaps=14/14, MRU=1504, Tag Stack{}
00239C7DFF82001201AE83008847
No output feature configured
Per-packet load-sharing
17 Untagged 97.9.15.0/24 0 Fa0/0 220.225.33.1
MAC/Encaps=0/0, MRU=1504, Tag Stack{}
No output feature configured
Per-packet load-sharing
Hanuman#show mpl
Hanuman#show mpls ld
Hanuman#show mpls ldp ?
backoff LDP session setup backoff table
bindings Show the LDP Label Information Base (LIB))
discovery Display sources for locally generated LDP Discovery Hello PDUs
neighbor Display LDP neighbor information
parameters Display LDP configuration parameters
Hanuman#show mpls ldp bin
Hanuman#show mpls ldp bindings
tib entry: 97.9.15.0/24, rev 8
local binding: tag: 17
tib entry: 97.9.15.1/32, rev 6
local binding: tag: 16
remote binding: tsr: 97.9.15.1:0, tag: imp-null
tib entry: 97.9.15.2/32, rev 2
local binding: tag: imp-null
remote binding: tsr: 97.9.15.1:0, tag: 299776
tib entry: 220.225.33.0/24, rev 4
local binding: tag: imp-null
Hanuman#
07-16-2013 06:51 AM
Hi,
Is the VPNv4 session up between the 2 PEs? Do a "show bgp vpnv4 uni all summ" and "show bgp vpnv4 uni all" on the cisco side to verify.
You should also add the "redistribute connected" under "address-family ipv4 vrf London" on the cisco side. And also unshut interface FastEthernet0/1.
One more thing. It is generally recommended to use a /32 prefix on the loopback interface of the PE. You should change the /24 to a /32 on the Juniper side.
Regards
07-17-2013 01:56 AM
Hi,
I have made changes as suggested by you however I can ping only one way from CPE1 (CPE Connected to Juniper router) to CPE2 ( CPE connected to Cisco router). I cannot ping from CPE2 ( CPE connected to Cisco router) to CPE1 (CPE Connected to Juniper router). I sm psdting the modified configuration alng with all the "Show" commands on Juniper and Cisco. Please help.
|
|
Juniper Router Show Commands
root@IBHANAN> show route table London.inet.0
London.inet.0: 6 destinations, 6 routes (6 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
10.255.8.0/24 *[BGP/170] 02:31:45, MED 0, localpref 100, from 97.9.15.2
AS path: ?
> to 220.225.33.2 via ge-0/0/2.0, Push 21
192.168.0.0/16 *[Static/5] 01:31:26
> to 200.200.200.2 via ge-0/0/1.0
194.1.1.0/24 *[BGP/170] 02:31:45, MED 0, localpref 100, from 97.9.15.2
AS path: ?
> to 220.225.33.2 via ge-0/0/2.0, Push 23
194.1.2.0/24 *[BGP/170] 02:31:45, MED 0, localpref 100, from 97.9.15.2
AS path: ?
> to 220.225.33.2 via ge-0/0/2.0, Push 22
200.200.200.0/24 *[Direct/0] 01:31:26
> via ge-0/0/1.0
200.200.200.1/32 *[Local/0] 06:59:29
Local via ge-0/0/1.0
root@IBHANAN> show route
inet.0: 6 destinations, 6 routes (6 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
97.9.15.0/24 *[Direct/0] 07:01:43
> via lo0.0
97.9.15.1/32 *[Local/0] 07:01:43
Local via lo0.0
97.9.15.2/32 *[OSPF/10] 06:34:34, metric 2
> to 220.225.33.2 via ge-0/0/2.0
220.225.33.0/24 *[Direct/0] 06:35:20
> via ge-0/0/2.0
220.225.33.1/32 *[Local/0] 07:01:15
Local via ge-0/0/2.0
224.0.0.5/32 *[OSPF/10] 07:01:44, metric 1
MultiRecv
inet.3: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
97.9.15.2/32 *[LDP/9] 06:34:20, metric 1
> to 220.225.33.2 via ge-0/0/2.0
London.inet.0: 6 destinations, 6 routes (6 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
10.255.8.0/24 *[BGP/170] 02:33:31, MED 0, localpref 100, from 97.9.15.2
AS path: ?
> to 220.225.33.2 via ge-0/0/2.0, Push 21
192.168.0.0/16 *[Static/5] 01:33:12
> to 200.200.200.2 via ge-0/0/1.0
194.1.1.0/24 *[BGP/170] 02:33:31, MED 0, localpref 100, from 97.9.15.2
AS path: ?
> to 220.225.33.2 via ge-0/0/2.0, Push 23
194.1.2.0/24 *[BGP/170] 02:33:31, MED 0, localpref 100, from 97.9.15.2
AS path: ?
> to 220.225.33.2 via ge-0/0/2.0, Push 22
200.200.200.0/24 *[Direct/0] 01:33:12
> via ge-0/0/1.0
200.200.200.1/32 *[Local/0] 07:01:15
Local via ge-0/0/1.0
mpls.0: 6 destinations, 6 routes (6 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
0 *[MPLS/0] 07:01:44, metric 1
Receive
1 *[MPLS/0] 07:01:44, metric 1
Receive
2 *[MPLS/0] 07:01:44, metric 1
Receive
299776 *[LDP/9] 06:34:20, metric 1
> to 220.225.33.2 via ge-0/0/2.0, Pop
299776(S=0) *[LDP/9] 06:34:20, metric 1
> to 220.225.33.2 via ge-0/0/2.0, Pop
299968 *[VPN/170] 01:33:12
> to 200.200.200.2 via ge-0/0/1.0, Pop
bgp.l3vpn.0: 3 destinations, 3 routes (3 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
200:200:10.255.8.0/24
*[BGP/170] 02:33:31, MED 0, localpref 100, from 97.9.15.2
AS path: ?
> to 220.225.33.2 via ge-0/0/2.0, Push 21
200:200:194.1.1.0/24
*[BGP/170] 02:33:31, MED 0, localpref 100, from 97.9.15.2
AS path: ?
> to 220.225.33.2 via ge-0/0/2.0, Push 23
200:200:194.1.2.0/24
*[BGP/170] 02:33:31, MED 0, localpref 100, from 97.9.15.2
AS path: ?
> to 220.225.33.2 via ge-0/0/2.0, Push 22
root@IBHANAN>
root@IBHANAN> show route table bgp.l3vpn.0
bgp.l3vpn.0: 3 destinations, 3 routes (3 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
200:200:10.255.8.0/24
*[BGP/170] 02:35:39, MED 0, localpref 100, from 97.9.15.2
AS path: ?
> to 220.225.33.2 via ge-0/0/2.0, Push 21
200:200:194.1.1.0/24
*[BGP/170] 02:35:39, MED 0, localpref 100, from 97.9.15.2
AS path: ?
> to 220.225.33.2 via ge-0/0/2.0, Push 23
200:200:194.1.2.0/24
*[BGP/170] 02:35:39, MED 0, localpref 100, from 97.9.15.2
AS path: ?
> to 220.225.33.2 via ge-0/0/2.0, Push 22
root@IBHANAN> show route table mpls protocol vpn
mpls.0: 6 destinations, 6 routes (6 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
299968 *[VPN/170] 01:36:25
> to 200.200.200.2 via ge-0/0/1.0, Pop
root@IBHANAN> show bgp summary
Groups: 1 Peers: 1 Down peers: 0
Table Tot Paths Act Paths Suppressed History Damp State Pending
bgp.l3vpn.0 3 3 0 0 0 0
Peer AS InPkt OutPkt OutQ Flaps Last Up/Dwn State|#Active/Received/Accepted/Damped...
97.9.15.2 200 319 359 0 2 2:37:32 Establ
bgp.l3vpn.0: 3/3/3/0
London.inet.0: 3/3/3/0
root@IBHANAN> show bgp neighbor
Peer: 97.9.15.2+64711 AS 200 Local: 97.9.15.1+179 AS 200
Type: Internal State: Established Flags:
Last State: OpenConfirm Last Event: RecvKeepAlive
Last Error: None
Options:
Address families configured: inet-vpn-unicast
Holdtime: 90 Preference: 170
Number of flaps: 2
Last flap event: Closed
Peer ID: 97.9.15.2 Local ID: 97.9.15.1 Active Holdtime: 90
Keepalive Interval: 30 Peer index: 0
BFD: disabled, down
NLRI for restart configured on peer: inet-vpn-unicast
NLRI advertised by peer: inet-unicast inet-vpn-unicast
NLRI for this session: inet-vpn-unicast
Peer supports Refresh capability (2)
Restart time configured on the peer: 120
Stale routes from peer are kept for: 300
Peer does not support Restart capability
Peer does not support 4 byte AS extension
Table bgp.l3vpn.0
RIB State: BGP restart is complete
RIB State: VPN restart is complete
Send state: not advertising
Active prefixes: 3
Received prefixes: 3
Accepted prefixes: 3
Suppressed due to damping: 0
Table London.inet.0 Bit: 20000
RIB State: BGP restart is complete
RIB State: VPN restart is complete
Send state: in sync
Active prefixes: 3
Received prefixes: 3
Accepted prefixes: 3
Suppressed due to damping: 0
Advertised prefixes: 1
Last traffic (seconds): Received 16 Sent 28 Checked 46
Input messages: Total 320 Updates 1 Refreshes 0 Octets 6215
Output messages: Total 360 Updates 5 Refreshes 0 Octets 7122
Output Queue[0]: 0
Output Queue[1]: 0
root@IBHANAN>
root@IBHANAN> show mpls lsp
Ingress LSP: 0 sessions
Total 0 displayed, Up 0, Down 0
Egress LSP: 0 sessions
Total 0 displayed, Up 0, Down 0
Transit LSP: 0 sessions
Total 0 displayed, Up 0, Down 0
root@IBHANAN> show route table inet.0
inet.0: 6 destinations, 6 routes (6 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
97.9.15.0/24 *[Direct/0] 07:08:08
> via lo0.0
97.9.15.1/32 *[Local/0] 07:08:08
Local via lo0.0
97.9.15.2/32 *[OSPF/10] 06:40:59, metric 2
> to 220.225.33.2 via ge-0/0/2.0
220.225.33.0/24 *[Direct/0] 06:41:45
> via ge-0/0/2.0
220.225.33.1/32 *[Local/0] 07:07:40
Local via ge-0/0/2.0
224.0.0.5/32 *[OSPF/10] 07:08:09, metric 1
MultiRecv
root@IBHANAN> show ospf interface
Interface State Area DR ID BDR ID Nbrs
ge-0/0/2.0 DR 0.0.0.0 97.9.15.1 97.9.15.2 1
lo0.0 DR 0.0.0.0 97.9.15.1 0.0.0.0 0
root@IBHANAN> show ospf neighbor
Address Interface State ID Pri Dead
220.225.33.2 ge-0/0/2.0 Full 97.9.15.2 1 32
root@IBHANAN> show route
inet.0: 6 destinations, 6 routes (6 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
97.9.15.0/24 *[Direct/0] 07:11:38
> via lo0.0
97.9.15.1/32 *[Local/0] 07:11:38
Local via lo0.0
97.9.15.2/32 *[OSPF/10] 06:44:29, metric 2
> to 220.225.33.2 via ge-0/0/2.0
220.225.33.0/24 *[Direct/0] 06:45:15
> via ge-0/0/2.0
220.225.33.1/32 *[Local/0] 07:11:10
Local via ge-0/0/2.0
224.0.0.5/32 *[OSPF/10] 07:11:39, metric 1
MultiRecv
inet.3: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
97.9.15.2/32 *[LDP/9] 06:44:15, metric 1
> to 220.225.33.2 via ge-0/0/2.0
London.inet.0: 6 destinations, 6 routes (6 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
10.255.8.0/24 *[BGP/170] 02:43:26, MED 0, localpref 100, from 97.9.15.2
AS path: ?
> to 220.225.33.2 via ge-0/0/2.0, Push 21
192.168.0.0/16 *[Static/5] 01:43:07
> to 200.200.200.2 via ge-0/0/1.0
194.1.1.0/24 *[BGP/170] 02:43:26, MED 0, localpref 100, from 97.9.15.2
AS path: ?
> to 220.225.33.2 via ge-0/0/2.0, Push 23
194.1.2.0/24 *[BGP/170] 02:43:26, MED 0, localpref 100, from 97.9.15.2
AS path: ?
> to 220.225.33.2 via ge-0/0/2.0, Push 22
200.200.200.0/24 *[Direct/0] 01:43:07
> via ge-0/0/1.0
200.200.200.1/32 *[Local/0] 07:11:10
Local via ge-0/0/1.0
mpls.0: 6 destinations, 6 routes (6 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
0 *[MPLS/0] 07:11:39, metric 1
Receive
1 *[MPLS/0] 07:11:39, metric 1
Receive
2 *[MPLS/0] 07:11:39, metric 1
Receive
299776 *[LDP/9] 06:44:15, metric 1
> to 220.225.33.2 via ge-0/0/2.0, Pop
299776(S=0) *[LDP/9] 06:44:15, metric 1
> to 220.225.33.2 via ge-0/0/2.0, Pop
299968 *[VPN/170] 01:43:07
> to 200.200.200.2 via ge-0/0/1.0, Pop
bgp.l3vpn.0: 3 destinations, 3 routes (3 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
200:200:10.255.8.0/24
*[BGP/170] 02:43:26, MED 0, localpref 100, from 97.9.15.2
AS path: ?
> to 220.225.33.2 via ge-0/0/2.0, Push 21
200:200:194.1.1.0/24
*[BGP/170] 02:43:26, MED 0, localpref 100, from 97.9.15.2
AS path: ?
> to 220.225.33.2 via ge-0/0/2.0, Push 23
200:200:194.1.2.0/24
*[BGP/170] 02:43:26, MED 0, localpref 100, from 97.9.15.2
AS path: ?
> to 220.225.33.2 via ge-0/0/2.0, Push 22
Router Show Commands For Cisco
Hanuman#sh ip bgp vpnv4 all
BGP table version is 14, local router ID is 97.9.15.2
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
r RIB-failure, S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
Route Distinguisher: 200:200 (default for vrf London)
*> 10.255.8.0/24 0.0.0.0 0 32768 ?
*>i192.168.0.0/16 97.9.15.1 100 0 i
*> 194.1.1.0 10.255.8.2 0 32768 ?
*> 194.1.2.0 10.255.8.2 0 32768 ?
Hanuman#show mpls forwarding-table
Local Outgoing Prefix Bytes tag Outgoing Next Hop
tag tag or VC or Tunnel Id switched interface
16 Pop tag 97.9.15.1/32 0 Fa0/0 220.225.33.1
17 Untagged 97.9.15.0/24 0 Fa0/0 220.225.33.1
21 Aggregate 10.255.8.0/24[V] 40090
22 Untagged 194.1.2.0/24[V] 0 Fa0/1 10.255.8.2
23 Untagged 194.1.1.0/24[V] 36502 Fa0/1 10.255.8.2
Hanuman#show mpls ldp bin
Hanuman#show mpls ldp bindings
tib entry: 97.9.15.0/24, rev 8
local binding: tag: 17
tib entry: 97.9.15.1/32, rev 6
local binding: tag: 16
remote binding: tsr: 97.9.15.1:0, tag: imp-null
tib entry: 97.9.15.2/32, rev 2
local binding: tag: imp-null
remote binding: tsr: 97.9.15.1:0, tag: 299776
tib entry: 220.225.33.0/24, rev 4
local binding: tag: imp-null
Hanuman#show mpls ldp discovery
Local LDP Identifier:
97.9.15.2:0
Discovery Sources:
Interfaces:
FastEthernet0/0 (ldp): xmit/recv
LDP Id: 97.9.15.1:0
Hanuman#show ip route vrf London
Routing Table: London
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route
Gateway of last resort is not set
10.0.0.0/24 is subnetted, 1 subnets
C 10.255.8.0 is directly connected, FastEthernet0/1
S 194.1.2.0/24 [1/0] via 10.255.8.2
S 194.1.1.0/24 [1/0] via 10.255.8.2
B 192.168.0.0/16 [200/0] via 97.9.15.1, 01:47:16
Complete Cisco Config
Hanuman#show run
Hanuman#show running-config
Building configuration...
Current configuration : 1831 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Hanuman
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$RMZ5$60IY29i1BBont51p.5gPM/
enable password password
!
no network-clock-participate slot 1
no network-clock-participate wic 0
no aaa new-model
ip subnet-zero
ip cef
!
!
!
no ip domain lookup
ip vrf London
rd 200:200
route-target export 200:200
route-target import 200:200
!
ip audit po max-events 100
mpls label protocol ldp
tag-switching tdp router-id Loopback0
interface Loopback0
ip address 97.9.15.2 255.255.255.255
!
interface FastEthernet0/0
ip address 220.225.33.2 255.255.255.0
duplex auto
speed auto
tag-switching ip
no cdp enable
!
interface FastEthernet0/1
ip vrf forwarding London
ip address 10.255.8.1 255.255.255.0
duplex auto
speed auto
no cdp enable
!
router ospf 200
router-id 97.9.15.2
log-adjacency-changes
network 97.9.15.0 0.0.0.255 area 0
network 220.225.33.0 0.0.0.255 area 0
!
router bgp 200
no synchronization
bgp log-neighbor-changes
neighbor 97.9.15.1 remote-as 200
neighbor 97.9.15.1 update-source Loopback0
no auto-summary
!
address-family vpnv4
neighbor 97.9.15.1 activate
neighbor 97.9.15.1 send-community both
exit-address-family
!
address-family ipv4 vrf London
redistribute connected
redistribute static
no auto-summary
no synchronization
exit-address-family
!
ip classless
ip route vrf London 194.1.1.0 255.255.255.0 10.255.8.2
ip route vrf London 194.1.2.0 255.255.255.0 10.255.8.2
!
no ip http server
no ip http secure-server
!
dialer-list 1 protocol ip permit
dialer-list 1 protocol ipx permit
no cdp run
line con 0
line aux 0
line vty 0 4
exec-timeout 35791 0
password password
login
!
!
end
Hanuman#
Juniper Router Full Config
root@IBHANAN> show configuration
## Last commit: 2013-07-16 20:30:30 IST by root
version 10.0R4.7;
system {
host-name IBHANAN;
domain-name IBHANAN.com;
time-zone Asia/Calcutta;
location building "Lake View County Apartments";
root-authentication {
encrypted-password "$1$UaKIM2Vv$cLACzAalf5.QhCdfoqmNZ0"; ## SECRET-DATA
}
login {
user ranjeet {
full-name "RANJEET ASHOK BADHE";
uid 2007;
class super-user;
authentication {
encrypted-password "$1$tscx4Gf.$XEnMrWOC8kxW6603AAUA2."; ## SECRET-DATA
}
}
user sujata {
full-name "Sujata Badhe";
uid 2008;
class operator;
authentication {
encrypted-password "$1$.FRRmZF5$8qybrOXGWClAmG0EOKm9W0"; ## SECRET-DATA
}
}
}
services {
ftp;
ssh;
telnet;
web-management {
http {
interface ge-0/0/0.0;
}
}
}
syslog {
user * {
any emergency;
}
file messages {
any any;
authorization info;
}
file interactive-commands {
interactive-commands any;
}
}
license {
autoupdate {
url https://ae1.juniper.net/junos/key_retrieval;
}
}
}
interfaces {
ge-0/0/0 {
unit 0;
}
fe-0/0/1 {
unit 0;
}
ge-0/0/1 {
unit 0 {
family inet {
address 200.200.200.1/24;
}
}
}
ge-0/0/2 {
unit 0 {
family inet {
address 220.225.33.1/24;
}
family mpls;
}
}
lo0 {
unit 0 {
family inet {
address 97.9.15.1/24;
}
}
}
}
routing-options {
router-id 97.9.15.1;
autonomous-system 200;
}
protocols {
mpls {
interface ge-0/0/2.0;
}
bgp {
group SESSION-ROUTER2600 {
type internal;
family inet-vpn {
unicast;
}
peer-as 200;
neighbor 97.9.15.2;
}
}
ospf {
area 0.0.0.0 {
interface ge-0/0/2.0;
interface lo0.0;
}
}
ldp {
interface ge-0/0/2.0;
interface all;
}
}
policy-options {
policy-statement London_Export {
term 1 {
from protocol static;
then {
community add London;
accept;
}
}
term 2 {
then reject;
}
}
policy-statement London_Import {
term 1 {
from {
protocol bgp;
community London;
}
then accept;
}
term 2 {
then reject;
}
}
community London members target:200:200;
}
security {
forwarding-options {
family {
mpls {
mode packet-based;
}
}
}
}
routing-instances {
London {
instance-type vrf;
interface ge-0/0/1.0;
route-distinguisher 200:200;
vrf-import London_Import;
vrf-export London_Export;
vrf-target target:200:200;
routing-options {
static {
route 192.168.0.0/16 next-hop 200.200.200.2;
}
}
}
}
root@IBHANAN>
07-17-2013 02:28 AM
Hi
Can you provide output from both CPE's
show ip route
show run <<< NOTE: When sharing configurations always remove passwords even when encrypted.
trace to the destination
!
Can the PE routers ping each other ?
07-17-2013 06:33 AM
Hi,
Do you do extended or regular ping? If you do regular ping, the egress interface ip address is used as the source of the ping packets. This would be an issue in your case as only the cisco side redistributes the PE-CE link.
You either need to do an extended ping using one of the loopback interface ip addresses as the source or redistribute the PE-CE link on the juniper side as well as follow:
policy-options {
policy-statement London_Export {
term 1 {
from protocol static direct;
then {
community add London;
accept;
}
}
term 2 {
then reject;
}
}
You might also want to configure vrf-table-label under the routing instance London.
Regards
07-17-2013 11:20 AM
Hi Harold,
Your observations are precise . The configuration perfectly worked as per your suggestions. I thank you for it. I am pasting the final working configuration of all the routers.
Working Juniper PE Configuration
root@IBHANAN> show configuration
## Last commit: 2013-07-17 23:32:18 IST by root
version 10.0R4.7;
system {
host-name IBHANAN;
domain-name IBHANAN.com;
time-zone Asia/Calcutta;
location building "Lake View County Apartments";
root-authentication {
encrypted-password "$1$UaKIM2Vv$cLACzAalf5.QhCdfoqmNZ0"; ## SECRET-DATA
}
login {
user ranjeet {
full-name "RANJEET ASHOK BADHE";
uid 2007;
class super-user;
authentication {
encrypted-password "$1$tscx4Gf.$XEnMrWOC8kxW6603AAUA2."; ## SECRET-DATA
}
}
user sujata {
full-name "Sujata Badhe";
uid 2008;
class operator;
authentication {
encrypted-password "$1$.FRRmZF5$8qybrOXGWClAmG0EOKm9W0"; ## SECRET-DATA
}
}
}
services {
ftp;
ssh;
telnet;
web-management {
http {
interface ge-0/0/0.0;
}
}
}
syslog {
user * {
any emergency;
}
file messages {
any any;
authorization info;
}
file interactive-commands {
interactive-commands any;
}
}
archival {
configuration {
transfer-on-commit;
archive-sites {
"ftp://sujata:password@195.195.195.195";
}
}
}
license {
autoupdate {
url https://ae1.juniper.net/junos/key_retrieval;
}
}
}
interfaces {
ge-0/0/0 {
unit 0;
}
fe-0/0/1 {
unit 0;
}
ge-0/0/1 {
unit 0 {
family inet {
address 200.200.200.1/24;
}
}
}
ge-0/0/2 {
unit 0 {
family inet {
address 220.225.33.1/24;
}
family mpls;
}
}
ge-0/0/3 {
unit 0 {
family inet {
address 195.195.195.194/24;
}
}
}
lo0 {
unit 0 {
family inet {
address 97.9.15.1/24;
}
}
}
}
routing-options {
router-id 97.9.15.1;
autonomous-system 200;
}
protocols {
mpls {
interface ge-0/0/2.0;
}
bgp {
group SESSION-ROUTER2600 {
type internal;
family inet-vpn {
unicast;
}
peer-as 200;
neighbor 97.9.15.2;
}
}
ospf {
area 0.0.0.0 {
interface ge-0/0/2.0;
interface lo0.0;
}
}
ldp {
interface ge-0/0/2.0;
interface all;
}
}
policy-options {
policy-statement London_Export {
term 1 {
from protocol [ static direct ];
then {
community add London;
accept;
}
}
term 2 {
then reject;
}
}
policy-statement London_Import {
term 1 {
from {
protocol bgp;
community London;
}
then accept;
}
term 2 {
then reject;
}
}
community London members target:200:200;
}
security {
forwarding-options {
family {
mpls {
mode packet-based;
}
}
}
}
routing-instances {
London {
instance-type vrf;
interface ge-0/0/1.0;
route-distinguisher 200:200;
vrf-import London_Import;
vrf-export London_Export;
vrf-target target:200:200;
vrf-table-label;
routing-options {
static {
route 192.168.0.0/16 next-hop 200.200.200.2;
}
}
}
}
CPE Attached to Juniper PE Configuration
R1#show run
Building configuration...
Current configuration : 1910 bytes
!
upgrade fpd auto
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R1
!
boot-start-marker
boot-end-marker
!
logging message-counter syslog
!
no aaa new-model
ip source-route
no ip icmp rate-limit unreachable
ip cef
!
!
!
!
no ip domain lookup
no ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
archive
log config
hidekeys
!
!
!
!
!
ip tcp synwait-time 5
!
!
!
!
interface Loopback0
ip address 192.168.1.1 255.255.255.0
!
interface Loopback1
ip address 192.168.2.1 255.255.255.0
!
interface FastEthernet0/0
no ip address
shutdown
duplex auto
speed auto
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface Ethernet1/0
ip address 200.200.200.2 255.255.255.0
duplex half
!
interface Ethernet1/1
no ip address
shutdown
duplex half
!
interface Ethernet1/2
no ip address
shutdown
duplex half
!
interface Ethernet1/3
no ip address
shutdown
duplex half
!
interface Ethernet2/0
no ip address
shutdown
duplex half
!
interface Ethernet2/1
no ip address
shutdown
duplex half
!
interface Ethernet2/2
no ip address
shutdown
duplex half
!
interface Ethernet2/3
no ip address
shutdown
duplex half
!
interface Ethernet2/4
no ip address
shutdown
duplex half
!
interface Ethernet2/5
no ip address
shutdown
duplex half
!
interface Ethernet2/6
no ip address
shutdown
duplex half
!
interface Ethernet2/7
no ip address
shutdown
duplex half
!
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 200.200.200.1
no ip http server
no ip http secure-server
logging alarm informational
control-plane
gatekeeper
shutdown
!
!
line con 0
exec-timeout 0 0
privilege level 15
logging synchronous
stopbits 1
line aux 0
exec-timeout 0 0
privilege level 15
logging synchronous
stopbits 1
line vty 0 4
login
!
end
Working Cisco PE Configuration
show run
Building configuration...
Current configuration : 1831 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Hanuman
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$RMZ5$60IY29i1BBont51p.5gPM/
enable password password
!
no network-clock-participate slot 1
no network-clock-participate wic 0
no aaa new-model
ip subnet-zero
ip cef
!
!
--More-- !
no ip domain lookup
ip vrf London
rd 200:200
route-target export 200:200
route-target import 200:200
!
ip audit po max-events 100
mpls label protocol ldp
tag-switching tdp router-id Loopback0
!
!
!
!
!
!
!
!
!
!
!
!
!
--More-- !
!
!
!
!
!
!
!
interface Loopback0
ip address 97.9.15.2 255.255.255.255
!
interface FastEthernet0/0
ip address 220.225.33.2 255.255.255.0
duplex auto
speed auto
tag-switching ip
no cdp enable
!
interface FastEthernet0/1
ip vrf forwarding London
ip address 10.255.8.1 255.255.255.0
duplex auto
speed auto
--More-- no cdp enable
!
router ospf 200
router-id 97.9.15.2
log-adjacency-changes
network 97.9.15.0 0.0.0.255 area 0
network 220.225.33.0 0.0.0.255 area 0
!
router bgp 200
no synchronization
bgp log-neighbor-changes
neighbor 97.9.15.1 remote-as 200
neighbor 97.9.15.1 update-source Loopback0
no auto-summary
!
address-family vpnv4
neighbor 97.9.15.1 activate
neighbor 97.9.15.1 send-community both
exit-address-family
!
address-family ipv4 vrf London
redistribute connected
redistribute static
--More-- no auto-summary
no synchronization
exit-address-family
!
ip classless
ip route vrf London 194.1.1.0 255.255.255.0 10.255.8.2
ip route vrf London 194.1.2.0 255.255.255.0 10.255.8.2
!
no ip http server
no ip http secure-server
!
dialer-list 1 protocol ip permit
dialer-list 1 protocol ipx permit
no cdp run
!
!
!
!
!
!
!
!
!
--More-- line con 0
line aux 0
line vty 0 4
exec-timeout 35791 0
password password
login
!
!
end
Hanuman#
CPE attached to Cisco PE Configuration
R1#show conf
Using 1372 out of 129016 bytes!
upgrade fpd auto
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R1
!
boot-start-marker
boot-end-marker
!
logging message-counter syslog
!
no aaa new-model
ip source-route
ip cef
!
!
!
!
no ipv6 cef
multilink bundle-name authenticated
!
!
voice dsp waitstate 0
!
!
!
!
!
!
!
!
!
!
!
!
!
memory-size iomem 0
archive
log config
hidekeys
!
!
!
!
!
!
interface Loopback0
ip address 194.1.1.1 255.255.255.0
!
interface Loopback1
ip address 194.1.2.1 255.255.255.0
!
interface FastEthernet0/0
no ip address
shutdown
duplex auto
speed auto
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface Ethernet1/0
ip address 10.255.8.2 255.255.255.0
duplex half
!
interface Ethernet1/1
no ip address
shutdown
duplex half
!
interface Ethernet1/2
no ip address
shutdown
duplex half
!
interface Ethernet1/3
no ip address
shutdown
duplex half
!
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 10.255.8.1
no ip http server
no ip http secure-server
!
!
!
logging alarm informational
!
!
!
!
control-plane
!
!
!
mgcp fax t38 ecm
!
!
!
!
gatekeeper
shutdown
!
!
line con 0
stopbits 1
line aux 0
stopbits 1
line vty 0 4
login
!
end
R1#
07-18-2013 06:41 AM
Hi,
I am glad it helped.
Have a great day
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide