08-27-2006 01:23 AM
hi,
I would be greatful if you could send me a good document on designing Route Reflectors for MPLS VPNv4 with best practices.
Rgds,
Harin
08-27-2006 04:09 AM
Hi Harin,
I have mentioned some important links for you to study through for RR Design & Implementation.
Just a note that RR design for IPV4 IBGP and VPNV4 MPBGP is not at all much different, except for
the extended communicaties exchanged in VPNV4. The path slelection & propogation rules remain the same.
HTH-Cheers,
Swaroop
Route Reflector Design For MPLS VPN
http://www.juniper.net/solutions/literature/white_papers/200160.pdf
BGP Peer Groups.
http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080093fb7.shtml
MultiPath Load Sharing
http://www.cisco.com/en/US/products/sw/iosswrel/ps1839/products_feature_guide09186a00800b5d5f.html
BGP Best Path Selection Algorithm
http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080094431.shtml
BGP Protocol Home Page
http://www.cisco.com/en/US/tech/tk365/tk80/tsd_technology_support_sub-protocol_home.html
08-27-2006 04:29 AM
Hi Swaroop,
thanks for the update.
cheers
Harin
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide