10-06-2004 05:06 AM
Hi,
I would like to have a link explaining in detail the operation and configuration of the "vrf aware" nat feature and the requirements for configuring it. for instance if i have a router configure for vrf lite and i want to translate traffic comming from that interface related to the vrf, can i do the translation inside the vrf without mpls enable with the vrf aware nat feature?
thanks ahead,
asanes
10-06-2004 05:20 AM
The following link explains the configurations and restrictions for vrf aware NAT.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t13/ftnatvpn.htm
Although your situation is not mentioned specifically I believe that it is supported.
10-07-2004 01:49 PM
thanks for the link.
The situation was supported... nat per vrf without the mpls-bgp configuration... the limitation is when i configure a general nat (for a interface that is not in any vrf) and a vrf nat. They can not work at the same time.
regards,
asanes
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide