07-07-2009 01:20 AM
I am trying to get connectivity to the internet for a vrf on our network, the vrf routing is ok, the nat is ok - can see translations, but still no internet access, have noticed that there is no entry for the nat outside translated address in the arp table or the vrf arp table. Have attached config.
Not sure what I am doing wrong, any help or suggestions gratefully recived
07-07-2009 02:58 AM
ok, have just noticed that the fa0/0 connects to a 3750 at layer 2 on vlan 36, that switch has the physical connection to the external router also on vlan 36.
Is it simply a case of configuring
ip vrf receive delegate_wireless
on the 2 switch interfaces?? Head hurts!!
07-07-2009 06:19 AM
Hello Anne-Marie,
if the C3750 works only at OSI layer2 there is no need to specify the VRF on it it just providing L2 connectivity between the external router and the internal one
Hope to help
Giuseppe
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide