10-29-2001 12:41 AM - edited 02-21-2020 09:57 AM
Hi. I need information about how to configure access-list per user in a Cisco Secure ACS for NT. I have a Cisco 3640 with 2 PRI and clients are calling with both analog and ISDN modems. Is it possible at all to do this for both analog/ISDN clients ?
Regards Hans
10-29-2001 02:31 AM
Hello Hans, you need to configure the access-lists in the router and work with user profiles.
configure the user as PPP-user in your ACS and tell there the access-list to apply for this user.
hope this helps,
regards Mike
10-29-2001 05:01 AM
Hi Mike. Thanks for your reply, is it not possible to configure the access-lists in the ACS for each user instead of doing it in the router.
Reg Hans
10-29-2001 06:05 AM
Hello Hans, well i think you can do this by using "av-pairs" just search on cco for that string how to get them work. as i remember they are at least in the userconfiguration! just let me know if got it work.
regards Mike
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide