Access lists in Cisco Secure ACS for NT

[hhakansson]

Hi. I need information about how to configure access-list per user in a Cisco Secure ACS for NT. I have a Cisco 3640 with 2 PRI and clients are calling with both analog and ISDN modems. Is it possible at all to do this for both analog/ISDN clients ?

Regards Hans

[mfriedl]

Hello Hans, you need to configure the access-lists in the router and work with user profiles.

configure the user as PPP-user in your ACS and tell there the access-list to apply for this user.

hope this helps,

regards Mike

michael.friedl@datakom.at

[hhakansson]

Hi Mike. Thanks for your reply, is it not possible to configure the access-lists in the ACS for each user instead of doing it in the router.

Reg Hans

[mfriedl]

Hello Hans, well i think you can do this by using "av-pairs" just search on cco for that string how to get them work. as i remember they are at least in the userconfiguration! just let me know if got it work.

regards Mike

michael.friedl@datakom.at