02-21-2017 11:55 AM
Hello All,
I have a customer that is running ACS 4.2 on a VM and they would like to migrate using the ACS to ISE migration program to migrate to an ISE hardware appliance.
Can the customer migrate from VM to HW (of corse after upgrading to ACS 5.8) and is there a discount associated with that migration option (from ACS VM to ISE HW)?
--
Grace and Peace,
Robert E Roulhac Jr
Virtual Systems Engineer II
Cisco TSN (Technical Solutions Network)
Office: 919.5745455
Solved! Go to Solution.
02-21-2017 12:23 PM
From the ISE ordering guide (Note the bold text):
3.2 Migration Ordering Information
Existing ISE customer with legacy ISE appliances that have reached end of life can also order ISE migration appliances. ISE migration appliances are denoted by an “-M-” in the part number (SKU) and listed in Table 4. Please note that migrating from physical to virtual, from virtual to physical or even from physical to a mix of physical and virtual appliances is possible when using ISE migration appliances. ISE Migration Appliances can only be used on a 1:1 basis to replace existing legacy appliances.
The Product SKUs needed are in this table:
The Migration SKUs do offer a discount.
The ordering guide can be found here:
Also note that there is an ACS to ISE Migration too that has just been updated, too:
ACS to ISE Migration Tool v2.2.0
Don't forget about these great resources, too:
ACS to ISE Migration
https://communities.cisco.com/docs/DOC-63880
ACS to ISE Migration - Part I - Planning
02-21-2017 12:23 PM
From the ISE ordering guide (Note the bold text):
3.2 Migration Ordering Information
Existing ISE customer with legacy ISE appliances that have reached end of life can also order ISE migration appliances. ISE migration appliances are denoted by an “-M-” in the part number (SKU) and listed in Table 4. Please note that migrating from physical to virtual, from virtual to physical or even from physical to a mix of physical and virtual appliances is possible when using ISE migration appliances. ISE Migration Appliances can only be used on a 1:1 basis to replace existing legacy appliances.
The Product SKUs needed are in this table:
The Migration SKUs do offer a discount.
The ordering guide can be found here:
Also note that there is an ACS to ISE Migration too that has just been updated, too:
ACS to ISE Migration Tool v2.2.0
Don't forget about these great resources, too:
ACS to ISE Migration
https://communities.cisco.com/docs/DOC-63880
ACS to ISE Migration - Part I - Planning
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide