cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1240
Views
0
Helpful
1
Replies

ACS 4.2 VM to ISE HW Migration

rroulhac
Cisco Employee
Cisco Employee

Hello All,

I have a customer that is running ACS 4.2 on a VM and they would like to migrate using the ACS to ISE migration program to migrate to an ISE hardware appliance.

Can the customer migrate from VM to HW (of corse after upgrading to ACS 5.8) and is there a discount associated with that migration option (from ACS VM to ISE HW)?

--

Grace and Peace,

Robert E Roulhac Jr

Virtual Systems Engineer II

Cisco TSN (Technical Solutions Network)

rroulhac@cisco.com

Office: 919.5745455

1 Accepted Solution

Accepted Solutions

Charlie Moreton
Cisco Employee
Cisco Employee

From the ISE ordering guide (Note the bold text):

3.2 Migration Ordering Information

Existing ISE customer with legacy ISE appliances that have reached end of life can also order ISE migration appliances. ISE migration appliances are denoted by an “-M-” in the part number (SKU) and listed in Table 4. Please note that migrating from physical to virtual, from virtual to physical or even from physical to a mix of physical and virtual appliances is possible when using ISE migration appliances. ISE Migration Appliances can only be used on a 1:1 basis to replace existing legacy appliances.

The Product SKUs needed are in this table:

MigrationTable.PNG

The Migration SKUs do offer a discount.

The ordering guide can be found here:

Cisco ISE Ordering Guide

Also note that there is an ACS to ISE Migration too that has just been updated, too:

ACS to ISE Migration Tool v2.2.0

Don't forget about these great resources, too:

ACS to ISE Migration

https://communities.cisco.com/docs/DOC-63880

ACS to ISE Migration - Part I - Planning

https://communities.cisco.com/docs/DOC-68794

View solution in original post

1 Reply 1

Charlie Moreton
Cisco Employee
Cisco Employee

From the ISE ordering guide (Note the bold text):

3.2 Migration Ordering Information

Existing ISE customer with legacy ISE appliances that have reached end of life can also order ISE migration appliances. ISE migration appliances are denoted by an “-M-” in the part number (SKU) and listed in Table 4. Please note that migrating from physical to virtual, from virtual to physical or even from physical to a mix of physical and virtual appliances is possible when using ISE migration appliances. ISE Migration Appliances can only be used on a 1:1 basis to replace existing legacy appliances.

The Product SKUs needed are in this table:

MigrationTable.PNG

The Migration SKUs do offer a discount.

The ordering guide can be found here:

Cisco ISE Ordering Guide

Also note that there is an ACS to ISE Migration too that has just been updated, too:

ACS to ISE Migration Tool v2.2.0

Don't forget about these great resources, too:

ACS to ISE Migration

https://communities.cisco.com/docs/DOC-63880

ACS to ISE Migration - Part I - Planning

https://communities.cisco.com/docs/DOC-68794