11-28-2018 03:33 AM
Folks,
I am doing the migration from ACS 5.7 to ISE2.3 using migTool release 2.3.0, i was able to export all the required policy from ACS, but i was not able to import anything to ise, but it was showing IMPORT FINISHED.
What could be the issue, all certificates are working perfectly.
I have attached the screen shot for your reference.
Hope that someone can help me on to solve my issue.
Thanks,
Manny
Successful export
import done but no success
logs
Solved! Go to Solution.
12-15-2018 08:41 PM
I believe "Predefined Reference Data" has to be selected, even though it takes time and "Will Not Be Imported".
12-15-2018 08:41 PM
I believe "Predefined Reference Data" has to be selected, even though it takes time and "Will Not Be Imported".
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide