Hi Folks,
I am having 10 model of Cisco CIVS-IPC-6400E Cameras installed in the Border of one big compound.
I am having an issue with zoom capacity. For example if the car is parked in within 5-meter distance, the plate number of the car is not ...
Hi,
I have a vWLC deployment with OS version 8.3, i am having an issue about the client IP address.
I have created 2 SSID, the first one (SSID1) is assign to the management interface with subnet (for example) 1.1.1.0/24
Second (SSID2) is assign to ...
Hi Guys,
I am having a vWLC deployment with around 200 APs, vWLC is running version 8.0.152.0.
I have a mesh implementation using AIR-CAP1532E-E-K9, I have total of 17 MESH APs, 4 of them are RAP and the rest are MAP, but i am having very slow ...
Folks,
I have implemented a CUCM in one of the clients and they require a billing software which is compatible with CUCM. Is there any recommendation from cisco about the required software?
Hope i can get a response here.
Thanks,
Manny
Folks,
I am doing the migration from ACS 5.7 to ISE2.3 using migTool release 2.3.0, i was able to export all the required policy from ACS, but i was not able to import anything to ise, but it was showing IMPORT FINISHED.
What could be the issue,...
Hi, I know this is a bit old post, but today i am having experience with 2.2 to 2.4 upgrade with the same error. Secondary was successfully upgraded, but when i upgrade the primary then i got the same error. I haven't found any related bug for thi...
Hi,
Initially, I have done the same configuration on your link and i was having the same issue.
Is there anyone knows the vlan mapping globally? i have more than 200 AP and it's time consuming to tag vlan in the APs individually.
thanks,
Thanks folks,
I was able to solve the issue!
the issue was, the antennas were installed in port 3 and 4, so we just move it to antenna port 1 and 2 and works as expected.
Thanks
Manny
Hi,
The issue with calling outside has been solved, it's because of the Telco Issue.
BUT, I cannot also call using local extension with different digits, for example, i cannot call extension 1300 using extension 1100 and vice verse. Any advice pl...