cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
566
Views
0
Helpful
1
Replies

ACS to ISE Migration Issue

mannygawadcco
Level 1
Level 1

Folks,

 

I am doing the migration from ACS 5.7 to ISE2.3 using migTool release 2.3.0, i was able to export all the required policy from ACS, but i was not able to import anything to ise, but it was showing IMPORT FINISHED. 

 

What could be the issue, all certificates are working perfectly.

 

I have attached the screen shot for your reference. 

 

 

Hope that someone can help me on to solve my issue.

 

Thanks, 

Manny 

 

Successful exportSuccessful exportimport done but no successimport done but no successlogslogs

1 Accepted Solution

Accepted Solutions

hslai
Cisco Employee
Cisco Employee

I believe "Predefined Reference Data" has to be selected, even though it takes time and "Will Not Be Imported".

View solution in original post

1 Reply 1

hslai
Cisco Employee
Cisco Employee

I believe "Predefined Reference Data" has to be selected, even though it takes time and "Will Not Be Imported".

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: