Adding accounts on ACS using SNMP

[shanemoss]

Hi folks,

I'm using ACS 4.2 and was just wondering if it's possible to add user accounts to it by using snmpset? If so, has anyone found any documentation on what needs to be done?  I have the SNMP running on it and get information from the ACS using snmpget.

Thanks, S.

[Amjad Abdullah · Accepted solution]

Hi Shane,

That is unfortunately not possible. You can not add users via SNMP.
You can however add multiple users at once via RDBMS synchronization.

HTH

Amjad

Sent from Cisco Technical Support iPad App

[shanemoss]

Thanks Amjad, I was beginning to believe it wasn't possible. Thanks for confirming it.
Shane.

Sent from Cisco Technical Support iPhone App