Adding TACACS license for F5 to Cisco ISE 2.4

[atifali.zaidi1]

hi Gents, i will need to add 60 X  F5 devices TACACS licenses to Cisco ISE 2.4 without using smart licensing.  how can i accomplish this ?

any part number available for this ?

[balaji.bandi]

You mean for the Device admin access for F5 device, you need to have device count license. what is the exiting License you have.

you can add device ISE will complain of the device count more than what you have purchased, but the device authnetication still works.

but you always have compliance issue due to over used License.

[atifali.zaidi1]

hi there, i dont have any TACACS licenses for F5 in ISE right now. if i need to add 60 F5 Tacacs licenses , how can i accomplish this ?

[balaji.bandi]

On F5 side i do not see any License required, you need to configure for device authentication to use ISE.

ISE side you need base License with Device count

Look at below thread help you :

https://community.cisco.com/t5/network-access-control/ise-2-4-tacacs-license/m-p/3766152