cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
762
Views
0
Helpful
3
Replies

Alert/logging mechanism on ISE

wanwa01
Level 1
Level 1

Hi all,

We had deployed ISE boxes in the network and having 1 primary admin name ISE-01 , 1 primary monitoring name ISE-02 and 2 PSN nodes (name ISE-03 and ISE-04). The questions are :

1 . we are having backup failed on primary admin(ISE-01) and getting the alert from node ISE-02.  We checked physically and no issue with ISE-02 backup. The backup failed is happening on ISE-01. is this correct behavious we are getting the alert from 02?

2. Can we dig further why the backup is failed. It was working initally and suddenly it happened.

thanks.

WH

3 Replies 3

Tarik Admani
VIP Alumni
VIP Alumni

Since ISE-02 is the primary monitoring node then this is expected to receive alerts from ISE-02 even though it is for ISE-01. ISE deployments have personas and the monitoring is centralized and forwarded to the primary MNT node.

Thanks,

Tarik Admani
*Please rate helpful posts*

thanks for update. last question is how big is the backup data? ( roughly) and if the disk is showing high, is there a way to what's taking up the space?

thx

Hi,

For ISE backups, please refer to the following link,

http://www.cisco.com/en/US/docs/security/ise/1.2/user_guide/ise_backup.html