Network Access Control

Hallo,I read a lot of threads about it but I am not able to upgrade the ACS Server.I always get the:% Manifest file not found in the bundleerror.I started @ 5.2.11 and tried to upgrad with no success.I was successful with upgrading to 5.3 and patch t...

Hi Guys,I'm trying to get a device authenticated to my wireless network using certificates. I get the generic error in ACS (4.2.0.124):EAP-TLS or PEAP authentication failed during SSL handshakeLooking in the Auth log I get:AUTH 12/09/2013 15:56:40 E ...

ISE 1.1.1 connected to Active Directory for both Radius auth and Administration auth.  I have an internal monitor account and the default internal admin account.  When I go to Administration > Admin Access > Authentication > Password Policy and attem...

Hello my name is Ivan, i have an issue:I have two instances of Cisco ACS v5.4 servers primary and replica, working alongside  802.1X PEAP with MAR workin to my wireless network, to authenticate users and computers in an enterprise.Everything works fi...

hello experts i want to use active directoy as external database to authenticate users in the NAC butam facing the problem of connect active directory with cam the adsso service cannot be startedattached is the message obtained from the cas log files...

Hello,I have a problem trying to add a Network Device  in my ACS 5.4 using a CSV file. The problem is: 2013-11-04 10:33:39: File Format Validation Completed2013-11-04 10:33:39: Import Started2013-11-04 10:33:39: Record number: 1, Network Device Rango...

Configured NAM2 for TACACS and added to ACS. ACS monitoring log shows that it successfully passes TACACS - all good. NAM says username/password incorrect. Do I need to add custom attributes for a NAM? There are no roles or anything. NAM is on 5.1(2) ...

Is it possible to have dual authentication using workstations auth certs and Windows domain credentials for authentication in ISE 1.2?                  

HiI have ISE and NAC agent 4.9.0.42 installed on all PCBut I observed that- on some computer NAC agent popup with timer (59s) , then timer decrement from 59 to 0s, NAC agen check the pc during this time, then if pc is compliant he get access- and on ...

We are using the AnyConnect client (v3.1.04063) and NAC agent (v4.9.3.5). Some of the clients are not successfully detecting that one of the NAC requirements is present (Microsoft Systsem Center Endpoint Protection - is installed and updated to withi...

ACS version: 5.4Because the audit requirements, AAA logs to be backed up more than 1 year.I used backup-logs command, but backup file is xxx.tar.gpg, i don't know how to view it ? I use "acs restore"  and "restore" command faild.I want to backup AAA ...

I want to create rule in ACS that will drop authentication attempts from a certain IP address so that it will force the device to move to it's secondary auth server.I used to create a dead route on the Server when we had it running on 3.3 and im wond...

   Hi All,i am testing a lab enviroment to deploy NAP using Windows server 2008 with NAP Role enabled and RADIUS refering to a 3560 Access switchi can get authorized on my port:interface FastEthernet0/11 switchport mode access dot1x pae authenticator...

Hallo,I have a question about the policy mapping in ACS 5.4.When a request matches in "Access Selection Rule" the request goes to an "Access Service".In "Access Service" there are three kinds of policy rules:- Identity:If condition match then result ...