Hi experts, Quick question about guest portals on ISE for wifi onboarding. Is it possible to have different personalized guest portal for different locations ? In this case all locations will share the same ISE deployment.
This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other troubleshooting best practices.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other troubleshooting best practices.
Forum Posts
Hi board,my CiscoNotification eMail alert told me, that a new BIOS is available for the SNS 35XX hardware appliances.Until now, the appliances were shipped with CIMC 2.0(9c) with the hint, that that should not be changed (unless advised by TAC).So no...
Hi,We have an issue with our deployment of mab...We use the global and interface specific configuration below.3.1. Global commandsaaa new-modelaaa authentication dot1x default group radiusaaa authorization network default group radius aaa accounting ...
Resolved! ISE Device Admin and Base license count
Hi board,I understand, that base licenses are required on the ISE, before a device admin (TACACS+) license can be applied.The documentation states, that 100 base licenses are required (I guess because this is the lowest available base license count)....
Resolved! NEAT x BPDUGuard
We are testing NEAT to provide network to some meeting rooms. BPDUGuard is globally enabled on authenticator switches. When supplicant switch is connected to a port, before the authentication completes, port is put in err-disable. If bpduguard is dis...
I've read that ISE REST API uses TLS (https) over port 9060 with basic authentication. Is there any additional encryption being done for the username and/or password other than sending the data thru the TLS tunnel? e.g. password encrypted with public...
Hi All I found the acl not work before my device during running auth below is the ACL interface command AAA command Would you have any suggest for me? Thanks!
Resolved! ACS and DNAC integration
Hi,Is there any documentation for ACS and DNAC integrationThanks
Resolved! Time-based Radius CoA dynamic trigger
Hi,How do I achieve the below use cases with ISE and Wireless?Only allow access to the network from 9am – 6pm, and disconnect any “active” clients after 6pm?Assign a Radius av-pair AIrespace-QoS-Level to clients who authenticate from 9am-6pm, but ass...
Hi All, Can we perform mac based authentication on ISE ? I am doing the same on WLC but have reached the maximum limit. Is there a way to do the same on ISE 2.3 ? If Yes, then how ?
To support wired/wireless BYOD for Windows and Macs, are admin rights needed for the logged in user on the local machine to accept the configuration changes in the wired/wireless profiles distributed by Native Supplicant Profile? I've looked in ISE ...
Resolved! MAC computer as a AD domain machine
Hi Team,Customer would like to know a MAC computer is an AD domain machine or not. And define different policy based on it. How can we do it in ISE? We found MAC did not send host authentication in ISE live log. And no register table to check it’s do...
Resolved! Cisco ISE integration with Aruba WLC
Dear ISE Team,I doing ISE PoV to my customer. My customer have Aruba WLC. I using virtual WLC Aruba to simulate my customer environtment. I try to do integration between Aruba WLC and Cisco ISE, but i can't find example configuration or documentation...
Hello guys, I am fairly new to Posture and I have hence a couple questions : I have read that the only way to implement Posture has to be done with AnyConnect (since NAC Agent is no longer supported). Is there any way to deploy it without it VPN fe...
I have a customer who has a concern :How do we get the static IP-SGT mappings defined in ISE to propagate to the VLAN-level on the Nexus 7K's?? This needs to be automated in a similar manner like it propagates to the default VRF on the Nexus 7K's.Tro...
