Network Access Control

Hello to all,Can anyone please help me with one of my problem? I have some Cisco IPSEC VPN Concentrator's that need to be removed from the network. We already have another Juniper VPN which is working fine all the way.But a large number of users were...

hi all, i am facing this very strange issue. I have configured this on my routeraaa new-modelusername cisco password cisco123I havent defined any aaa authentication and my line vty config is also empty. Now when i telnet to this router, i am asked fo...

Hello Everybody, I have a CISCO ACS 1113 with release 4.1.1 build 23 patch 5. I can set the IP ADDRESS using the CLI but the problem is: 1) After some time or after a reboot the appliance the IP ADDRESS is lost. In this moment the network adapter is ...

TACACS is being used to provide access to the switches. We have set up an authorization set, but I want to know how to assign a specific command to an priv level. For instance we grant a vendor level 5 access, and want to assign the command "show i...

just recently upgraded to 4.1 code and now I am receiving a constant stream of alert emails"Service CSAuth not running: will attempt to restart"then"Service CSAuth re-started OK"any idea as to why.

I'm currently able to logon to my internal network 192.168.4.0/24 but not able to get my incoming ACS downloadable ACL working. Combination:PIX605E 6.3(5) - ACS 4.1(1) Build 23 Patch 5.This is my list: permit ip host 192.168.4.200 any (where any can ...

How do you log commands entered by a user connected via telnet. AAA server is ACS, and AAA client is a Cisco Switch

Hello.I have configured replication between two ACSv4.2.Everything worked fine except the AAA clients belonging to NDGs.I am allowing tcp/2000 in FWSM an I am not using NAT.The rest of the configs seem to be OK since I was able to replicate all the r...

Hi everybody -we are implementing AAA authentication via LDAP directly between the ASA an our Microsoft DCs - works wonderfull. What I dont seem to get to work is the LDAP-communication if I try to reach the AAA Server through a Site-2-Site VPN tunne...

Hi, I have an ACS 1112 appliance that is currently running on 4.1 and was brought up to patch level 4.1.1.23.3. We were attempting to install patch 4.1.1.23.4 through the Web Console when we lost connectivity and never got it back. After logging in...

Hi All,We have recently upgraded one of our routers to version 12.2SR.One of the problems we are facing is that radius authentication is not working correcly for the enable part.We are using loopback address as a source.ip radius source-interface Loo...