Network Access Control

I am setting up a pilot group for wired 802.1x testing. I have it working correctly on a C2950 and C3550s. I am having trouble with the RADIUS failover on my CATOS C4006 series switches. When I disable the primary RADIUS Server to test failover, t...

I'm attempting to use EAP-TLS authentication for our Wireless clients.We are using a MS Win2k CA and have followed the "User Guide for Cisco Secure ACS Solution Engine Version 4.0" and the "EAP TLS Deployment Guide for Wireless WAN Networks" White p...

I am trying to import a certificate (issued by a Windows 2003 CA) and I'm getting this error:"Unsupported private key file format."Any ideas?

Hello,How can I enable ciscowork component in order to configure the user's management rights ?In Shared Profile Component, we don't see Ciscoworks component, and when we configure a user, we don't see the Ciscowork module contrary to version 3.3.1 o...

GOod morning all, I am trying to configure AAA using RADIUS with ACS 4.1 SE and various Cisco Devices. I have configured the ACS to perform group mapping on personnel who I want to give access privileges. What I would like to do is give that group ...

I want to implement NAC , so i want to know whats are the basic requirments which hardware and software is required to implement it

I have a setup described in Article # 43486, but with ACS appliance running 4.1Would anyone please explain pros & cons of this set-up from security point of view.Thank you

HI!I've juste configured port based authentication on switches,and it was completed successfully,I applied per users ACL using AV-PAIR for authorizing users.when verifying the switch all things are correct.I want to do the same thing to limit access ...

Network environment:- Windows 2003 with enterprise CA- Cisco ACS appliance 4.1.1.23- Cisco 1240 AG series APsWireless clients:- Windows XP SP2Brief steps taken:- Installed Enterprise CA- Created copy of web server certificate with option “Mark keys...

I am struggling in configuring the TACACS configure to allow authentication via Cisco ACS, I could able to configure for switches 2950,3750 but not with ASA & PIX, can any let me know the configs?

I am having a heck of a time backing up my ACS. I have an FTP server running on a network share. My question is under the field "Directory" what is the syntax the ACS is looking for? The bullet describing the "Directory" says: Directory. The "relativ...

Hello,two aaa radius servers configured, the authentifications works, failover works, local authentification works when no server is available (configured this way).But, when the radius servers are down, a "show aaa server" is showing that they are U...

Hi All,In my environment there are two Windows Domain - Doamin A and B. ACS is configured on member server in domain B and hence Windows Authentication for users in Domain B is working fine. However I'm unable to see domain A in Configure Domain Li...

Hi,I've put AAA config on a load of routers but now it seems that ISDN backup does not work properly. the interfaces come up but they won't properly authenticate with the ISP and get an IP address.I suspect that AAA is blocking this in some way. how ...

Hi,We encounter problem to implement NAC phase 2 with symantec.ACS is an appliance one, version 4.0We?ve installed the Symantec AV pair on the ACS : that?OK.The following softwares are installed on the client PC:- Cisco CTA : ctasetup-win-2.0.1.14.ex...