Network Access Control

Hi, I have a Cisco Concentrator. Users using their Cisco VPN client authenticate using RADIUS (Active Directory) which just a windows IAS server.I eventually want to move the Client VPN's over to the ASA's but I can't find where to add the authentica...

Hi there.I have a 2611 router, IOS version 12.3(25), configured as an VPN server. I have already configured the IP Sec parameters, users...and it is all working fine. But my customer needs to limit the access of one user that uses the same group and ...

I am setting up a 2801 router for Cisco clients to connect to and working on getting it to work with IAS server. I've been looking at lots of configuration examples and see that I can do isakmp authorization to Radius but can't get it to work. I have...

I want to import the 1500 users in ACS. i am using cli utilities (CSUtil.exe). I am able to import the user, but I dont know which options to be used for populating the following user info1) User Expiry date2) Apply shared profileetc.Can somebody hel...

Hi;We have ACS 4.1 and we want to authenticate our wireless users over ACS. But we want to obtain one-time passwords for wireless. How can we do that with ACS?

Which is the temperature of operation of the ACS appliance?

Hello, I have a 3640 router with c3640-ik9o3sw6-mz.122-8.T.bin version but when I try to validate the username and password with a radius server, the debbug message is "AAA/AUTHOR: config command authorization not enabled" and I'm sure that the radiu...

HelloI have got problems with authentication in another domain.Root domain has got two child domain. ACS Agents are installed on two domain controllers in root domain.Authentication in one child domain is ok. Authentication in other child domain is n...

I have set up an ASA 5520 that will allow us to authenticate via SSH using Cisco Secure ACS. My issue is that once you ssh into the inside interface of the device, it will ask you for a login. I type in my domain account login and I SSH just fine. My...

I have configured an ASA running 7.2.3 code to do authentication, authorization, and accounting to an ACS server. The authentication and command shell authorization is working fine, but it seems that the accounting portion is not. Previously I was ru...

Hi all,Does anyone know if ASA support more than 1 authentication server at the same time? I want to authenticate WebVPN users by LDAP and RSA SecurID. I mean WebVPN users have to enter the LDAP username, password and SecurID tokencode when login.Ple...

I IIS installef and working and I installed UCP 3.2 and I can connect to http://webserver/secure/login.htm but when I enter the username/password I get a message indicating the page address is incorrect and http 405 message. I went by the Installatio...

HiI'm trying to set up Machine Access Restriction.I configured the ACS to allow PEAP Machine Authentication.Machine Access Restriction is also set to use de <No Access> group in case one of the authentication methodes are not ok.When computer (member...

Is it possible to configure switches to allow telnet when AAA servers are down? I can get into switches via console cable with both servers down since the switch will failover to the enable password. Is it possible to have telnet sessions failover as...