Network Access Control

Background:My company has approximately 500+ devices all across the country (mainly 2801's, 2924's, 2950's, and 2960's) and approx 3 people that have a real idea of how to configure the devices, and 2 or 3 that have a general clue about how to do it....

I have an MSFC with 12.2(18)SXF6 and a VPNSM configured for radius authentication and authorization. In the attachment, I can see the filter-id sent, but when I connect, I can still ping addresses other than in 10.1.x.x, which the acl should disallow...

the SACS1113 as a AAA server,and the administrator has creates 200 users . The administrator want the all users can only change their own password on the AAA server through web browser. How can the administrator do ? THANKS

Dear All, We have ACS ver3.3 running , I want to know how exactly step by step be able to integrate the ACS with the Active Directory, in order to make the user log on to the network and to the domain using only one user name and one password , becau...

Hi,We have deployed ACS 1113 with 4.1 version recently in our network.I had configured downloadable access list in ACS for remote VPN users.But when user connects to and authenticate to ACS then the user is not able to browse internet from his PC.Ear...

We run Cisco ACS v3.3 (Windows) on two servers over our WAN, and replcate the internal databases for redundancy. The problem is that replications fail between the ACS servers and it is because of the default port the ACS servers use to replicate over...

I'm currently using and older ACS and TACACS+ with a PIX 506E for VPN and have to test RSA SecurID which uses RADIUS IAS. I would like to use both at the same time; the ACS for current VPN and the IAS just to test a single RSA device, but don't know ...

Hi All,Does any one know how can I modify the Login Page appearence of ACS 4.1. I want to add my company logo along with Cisco on login screen. Thanks

I am getting this message on the ACS 4.1 server failed authentications log.The strange point is that i get thme only for a specific timeframe and then they stop.I am using PEAP-GTC as the authentication method with 1242ABG APs and Intermec CK31 clien...

HiI need an ACS box to return IETF RADIUS attributes 135 & 136 to a NAS for the assignment of DNS servers to clients.The ACS 3.3 user guide lists these as supported IETF RADIUS Attributes however they don't seem to be available under Interface Config...

Hi all,Two factor authnetication is considered be any two of the following.1) Something you know2) Something you have3) Something you areI want to know whether any of you would consider the following as two factor authentication...A preconfigured cop...