Network Access Control

Hi,We've Cisco ACS v2.3 on Solaris with about 100 users...I would like to know how you can retrieve, and the steps, the complete list of user from the ACS - Database...More...could anyone tell me if it's possible to convert the Db from UNIX to NT an...

I have gotten my dialup to work, however I am confused on my AAA configuration. I am using the following:aaa authentication login SECURE group radius localaaa authentication login NO_AUTHEN noneaaa authentication login LOCAL lineaaa authentication p...

I have a 3640 running IOS 12.2(2)T1 Enterprise plus. It is doing PPPoE VPDN using radius authentication.The problem I have is that I see the PPP chap authentication request come in to the 3640 but I don't see any radius request being sent out of the...

Hi!We are planning to implement Secure ACS authentication with Novell NDS.But our Novell Admin is very concerned about the way ACS will communicate with NDS.ACS needs Administrator rights to get linked to NDS database and it is something we should kn...

I am trying to configure radius authentication on 'telnet' and 'enable sec' to a router connected on the same lan, (172.16.99.10 -pc / 172.16.99.20 - Router). I am using a stellbelt radius server on the same pc i telnet from and when i debug the rout...

Hi,I am new to cisco and I really need somebody to help me on this.I need to configure the cisco voice gateway so that i) When an user (from netmeeting) trying to call to POTS attached the gateway, he can hear IVR to ask for user and pin number.ii) W...

How do you tie down access to different user groups when you are using a tacacs server for other activities as well as router access ?

Instead of Home Agent(Router 7507),I tried to use AAA Server and the instruction is as follow;user = 20.0.0.1 {service = mobileip {set spi#0 = ¡°spi 100 key hex 12345678123456781234567812345678¡±¡±}}I don't know how to configure above the format on m...

I would like to know if anyone has setup an ACS server using Radius to act as a DHCP server. We areusing ACS server version 2.5 and we are trying to let the server pass information such as DNS suffix to the authenticated dial in client. At the moment...

We are trying to connect to a Pelco camera/webserver and the normal AAA auth seems to need the virtual HTTP workaround, as described in the PIX documentation. Does someone have an example of using this for an Inside-to-Perimeter connection?

I'm going to use a Cisco ACS 3.0 on Win2k. I'm also looking for ways to make that setup robust e.g. by implementing a second ACS server. Ideally, I would like to have loadbalancing from the VPN3000 gateways to the two ACS's. So, does ACS have feature...

Does anyone know of a (preferably free) application purely for AAA accounting, I'm not interested in authorisation just the logging?Thanks.

I have the concentrator set up so it will authenticate to the ACS database and an NT domain, but I need to authenticate to a Novell NDS tree. I set up the external database on the ACS specifying the tree and context, it succesfully validates the admi...

Hi, I'm trying to get remote access solution working with RSA Security OTP (tokens). One option I've tried is specifying 'ppp authen chap pap dialin one-time' on dialer / group asyn interfaces (where dialin is method list name and methods specified...

After successfully implementing Cisco Secure ACS v2.6, I noticed an error in the "FAILURE" logs for one of the 5300s. It states "dnis:974xxxx Authorization failure...user unknow". This device pools lines into an ISDN incoming line. It seems everyt...