Network Access Control

In PIX OS version 6.1, the "aaa authentication" command does not have the option to configur for either inbound or outbound. Is this mean when I configure the aaa authentication command, it's for both inbound and outbound??If it is for both is ther a...

Hi,I just read that downloadble ACL's do not work for VPN users and that it only helps in passthrough authentication. The workaround solution was to define the ACL on the pix and send down the ACL number on the ACS server. I have been lookking throug...

Scenario: Currently have a ACS (3.02) for Win2K, we recently purchased another server (faster) to act as a secondary AAA server.Question:1) Once the initial replication occurs between the old server (primary) to the new server (secondary), are there ...

Hi AllIs it possible to use radius for authentication on Cisco switches? These switches range from Cat1900 to 29xx to 3550 to 5500!!Regards!

Hi I just install Cisco ACS 2.6 and want to work with Cisco concentrator 3015. I am new for ACS 2.6. I am using internal group for vpn user in the 3015 now. Can I setup external group with ACS 2.6 for new group, still keep no change for internal grou...

I recieve a failed attempt when dialling in to the network and using Safeword key token to authenticate with the Cisco ACS the Error is "Eternal DB reports Error condition" Any help please.

We have switched to a different Radius Server (FreeRadius) in order to be able to use AAA Acounting to bill the customer by the byte. The Cisco box being used is a 7206VXR/NPE300 and when we point the Cisco router to the new Radius Server, the CPU ut...

HiWe will possibly be attaining a Cisco Secure ACS 2.4 for installation on an NT server. The current solution that we have is just a bank of modems at the back on the NT server. We are hoping to change this by installing the ACS on the NT server and ...

I am attempting to set up my 6506 to use RADIUS authentication using my Windows 2000 accounts database. What I would like to do is make it so my Windows 2000 account (we'll call it "superuser" here) has level 15 access to the switch, with a local acc...

Hi there,I have set up a 3640 server for dial in access and want to point users at a Windows 2000 RADIUS server for authenication. Can anybody help me with the RADIUS AAA commands on the router?Thanks in advance,Daniel,

Dear Members,We are using a cisco 3620 (IOS V 12.1.(5)T10) with ACS version 3.0(1) for Windows NT/2000. We use the RADIUS protocol and use the Windows 2000 user database to authenticate users.We want users to change their password once it expired. Bu...

I would like to move to AAA for better administration. We currently have 100 DDR dialer interfaces using chap. Can you enable AAA an slowly migrate each dialer interface to AAA or is it all or nothing. If it is all or nothing can you change the diale...

Is it necessary to install Ciscosecure ACS 3.0 on a Windows 2000 domain controller or can it also be installed on a member server ?

I'd need some information on CiscoSecure ACS.I've read on Cisco's web-site that I can import a text file into theCiscoSecure, in particular of the format reported below (concerningmobile IP).My questions are:1) in which way can I import such a file? ...

Hi,I am using ACS against a LDAP directory and I having problems with the group mapping. In general, everything is working pretty good. If I setup a group map with one LDAP group to one ACS group I have no problems the user gets authenticated and ass...