Network Access Control

Hi   Is it possible for ISE to rename a port after a device has successfully finished a dot1x authentication? I'd like to be able to pull the hostname of the device and put it on the port description and then have it change back to a generic port des...

First, let me explain a little about our setup.  We use Meraki switches at all of our sites, and we have a mix of zero clients, thin clients, desktops and laptops.  Typically, at a user workstation there is a VOIP phone with a computer port, so for e...

Hi All    I am trying to find if its possible to use Cisco WLC Wired Guest Solution with ISE as CWA. Wired Guest Solution on WLC fits well within organizations who would not like to extend a DMZ (guest) vlan into their Corporate LAN but I am not sure...

Do you any reference on pxgrid v1 and v2, or does this apply to a specific version of ISE?

Hello, I'm looking for a way to implement max sessions for group/user, but usgin AD groups. Since the group mapping features have not been passed from ACS to ISE, is there any other way (via ISE attributes or any other mapping) to enforce that a memb...

Hi experts,I would like to double-check an ISE proposal I'm sending to a customer.In my customer's scenario there are 2 DCs (located in the same medium size country) which are connected via layer 3, and are redundant of each other. In each DC, we'll ...

Hi Team,We are working on an opportunity of NAC solution and have queries unanswered as below:Control on endpoint by posture scan for USB connected devices e.g. printer or scanners or NAS box. The use case for example is that the customer has a limit...

Hello,I have a customer running ACS 5.8 on 3595 appliances. They would like to convert them to ISE 2.3 appliances running the device admin license.The ordering guide refers to "Migration appliance ordering information", but I can find no such informa...

Hi  I have several question and i hope i can put it on one go. Current Situation I have Cisco ASR1002-X with Cisco IOS XE Software, Version 03.13.02.S version. Currently it is configured as PPPoE Server serving our customer with no problem. Now i wan...