06-07-2024 10:02 AM
Can't access ISE configured devices thru the console cable:
i.e. there is a cisco c9500 switch/router connected to the ISE.
The 9500 is configured in ISE and can be accessed with SSH. Note: it's the same with other devices configured in ISE. I can access thru ssh, but to access thru the console port I have to disconnect the ISE.
Thank you,
Dave
Solved! Go to Solution.
06-11-2024 07:21 AM
This was the fix, added the following to aaa authentication configuration:
aaa authentication login default local
I now can access thru the console with out disconnecting the TACACS/ISE server.
06-07-2024 10:07 AM
- What happens when trying , do you have an authentication error , or other ?
- Check logs on the switch(es) through SSH just after trying ,
M.
06-07-2024 10:55 AM
%SEC_LOGIN-4-LOGIN_FAILED Login failed [user: username] [Source: 192.168.1.5] [localport: 23] [Reason: Login Authentication failed]
06-07-2024 11:10 AM
- Check the running configuration of the console line ; make sure that the authentication schemes attached to it have local as higher priority w.r.t ise-radius ,
M.
06-07-2024 10:33 AM - edited 06-07-2024 10:55 AM
deleted post
06-11-2024 07:21 AM
This was the fix, added the following to aaa authentication configuration:
aaa authentication login default local
I now can access thru the console with out disconnecting the TACACS/ISE server.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide