Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Current Setup:There is one Layer 3 (L3) link from Network B (Stacked L3 Switch) to Leaf 1A in Network A.This creates a single point of failure, so we want redundancy.Proposed Plan:Move the existing L3 link from Leaf 1A to Spine 2.Add a new L3 link fr...
Running ISIS and being redistributed into bgp and there are no ebgp routes being preferred.We are running a spine leaf configuration using Nexus c9338 switches using ISIS and BGP. It has ibgp to other leaf switches and ebgp to external devices. One o...
I want to be able to ping from switch 1 thru the inside interface to switch 2 connected to the outside interface and vice versa.This is a very basic initial setup to check connectivity thru the FW (Firepower 2130). The switches ( Cisco 3750s) are...
I have tried and tried, here is a better explanation of what I'm trying to do: I want to be able to ping from switch 1 thru the inside interface to switch 2 connected to the outside interface. It seems that I should be able to create a policy rule...
I'm setting up a Cisco Firepower 2130 FTD, no FMC. This is for a lab environment.I want to be able to ping thru the Cisco Firepower 2130 from a switch on the inside interface to a switch on the outside interface and vice versa to check connectivity. ...
Ok, bgp routes are back. this is what I did. I was going to upgrade the NXOS on L1B in hopes that would fix the issue and since the L1B switch is in VPC mode to L1A and L1B was the primary, (it's recommended to upgrade the secondary first). I attempt...
the show system internal socket| include 179 is not supported on the NXOS 10.2.6 and can't find a like command. Tried show system internal connections | include 179, but that is also not supported.
The issue started in June when L1B no longer was using bgp routes. Looking at the configs from May and June I do see a difference in the outgoing ports. CDP neigh detail from L1B has a difference from May to June when the issue started: There are 2 ...
Yes, isis is on all the leafs and spine switches. No there are no route reflectors configured, ISIS is being used as the IGP on all the leaf switches and spines. A vlan is being used as the update-source in bgp. When I check: show ip bgp summary an...
