03-05-2018 08:44 PM - edited 02-21-2020 10:47 AM
From one interface traffic is not forwarding to another interface.
ciscoasa# show module all
Mod Card Type Model Serial No.
--- -------------------------------------------- ------------------ -----------
0 ASA 5585-X Security Services Processor-10 wi ASA5585-SSP-10 JAD162206BS
Mod MAC Address Range Hw Version Fw Version Sw Version
--- --------------------------------- ------------ ------------ ---------------
0 a493.4c43.1860 to a493.4c43.186b 2.0 2.0(13)0 8.4(4)1
Mod SSM Application Name Status SSM Application Version
--- ------------------------------ ---------------- --------------------------
Mod Status Data Plane Status Compatibility
--- ------------------ --------------------- -------------
0 Up Sys Not Applicable
Firewall is in transparent mode
Following is the interface level configs
interface GigabitEthernet0/0
description WAN
nameif inside
bridge-group 1
security-level 100
!
interface GigabitEthernet0/1
description LAN
nameif outside
bridge-group 1
security-level 100
03-05-2018 08:55 PM
HI,
Your interfaces are the same security level. Is this correct? Shouldn't the outside interface be security level 0?
Thanks
John
03-05-2018 08:57 PM
tried zero as well, but found same . As both are same security level interface , we have allowed same-secuirty-level
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide