03-18-2014 09:54 PM - edited 03-10-2019 09:33 PM
When I take a backup of primary, just the application backup, it is more than 10GB.
Is that normal. I noticed there are no purge settings configured. But since this is just application backup, the monitoring logs should be considered under this right?
03-18-2014 10:25 PM
What is the current version of ISE software you are using. Are these backups for Admin or MnT nodes. Did you ever turn on the debugs logs while troublehsooting an issue? Anyway, the backup size is pretty large, should be an issue with the huge log files? There is also a manual option to purge from the CLI using "application configure ise".
*Do rate helpful posts*
03-18-2014 10:42 PM
We are running 1.0.4
ise/admin# application configure ise
Selection ISE configuration option
Reset Active Directory settings to defaults
Display Active Directory settings
Configure Active Directory settings
Restart/Apply Active Directory settings
Clear Active Directory Trusts Cache and restart/apply Active Directory settings
Can please advise which to choose
03-19-2014 10:16 AM
For Backup using cli
03-19-2014 08:41 PM
The backup of 16gb is ok it seems. I checked wih Cisco TAC. I will post soon how to reduce the size!
03-20-2014 09:41 AM
I just wanted to add in here that on the older versions of ISE, the backups are massive. Ours were right around 7 to 8 GB. Once we updated to 1.2, the backups are much more reasonable at 300 to 400 MB. They greatly improved the backup process in the newer versions.
04-04-2014 01:52 AM
Correct, mine were 7 to 8GB as well on the first ise version. Now with 1.2 it is only 240MB.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: