Cisco ISE Backup

[rakeshvelagala]

Hi All

When I take a backup of primary, just the application backup, it is more than 10GB.

Is that normal. I noticed there are no purge settings configured. But since this is just application backup, the monitoring logs should be considered under this right?

Thanks

[Jatin Katyal]

What is the current version of ISE software you are using. Are these backups for Admin or MnT nodes.  Did you ever turn on the debugs logs while troublehsooting an issue? Anyway, the backup size is pretty large, should be an issue with the huge log files? There is also a manual option to purge from the CLI using "application configure ise".

Regards,

Jatin Katyal

*Do rate helpful posts*

[rakeshvelagala]

Hi

We are running 1.0.4

ise/admin# application configure ise
 Selection ISE configuration option
 [1]Reset Active Directory settings to defaults
 [2]Display Active Directory settings
 [3]Configure Active Directory settings
 [4]Restart/Apply Active Directory settings
 [5]Clear Active Directory Trusts Cache and restart/apply Active Directory settings
 [6]Exit

Can please advise which to choose

Thanks

Regards