cisco ISE Guest Web authentication doesn't work with SG300 switch

[Qays]

Hi 

I used cisco SG300 switches as access switch and I trying to use cisco ISE as NAC, I have configured the switches and the ISE, the authentication and authorization works for the Active Directory users, but the Guest web users authentication doesn't work, I have configured every thing as the documentation.

Is the problem in the switch doesn't support COA and DACL ???

Thanks...

[marce1000 · Accepted solution]

- The SG seems not supported by ISE :

           https://www.cisco.com/c/en/us/support/security/identity-services-engine/products-device-support-tables-list.html

 M.

[Qays]

Thanks for the answer......

[Qays]

Could you advise me which series of access switches that  I should use...

Thanks,,,,,

[marce1000 · Accepted solution]

 - That depends on your Intranet's network 'power needs' for a generic start go here : 

             https://www.cisco.com/c/en/us/products/switches/switch-selector.html

 (but keep an eye on the ise compatibility matrix as posted earlier).

 M.

[Qays]

OK ,,, Thanks