08-04-2019 07:11 PM
Hello,
Is there a way in Cisco ISE - My Devices Portal, to have the Device Status auto change from "Not registered" to " Registered" (see image below) when a user adds their own device? Not using Native Supplicant and/or Certificate Provisioning. Just using MAB and Identity PSK. Already verified the authentication works. Trying to get the status to change otherwise I think this might confuse end users.
Running Cisco ISE 2.1
Thanks!
Solved! Go to Solution.
08-06-2019 06:55 AM
08-05-2019 11:02 AM
08-05-2019
01:17 PM
- last edited on
03-09-2022
11:08 PM
by
smallbusiness
Thanks for the reply @Francesco Molino! Is the My Devices section part of BYOD? I am setting up something similar to this guide - https://community.cisco.com/t5/security-blogs/ise-byod-registration-only-without-native-supplicant-or/ba-p/3099290.
This is the process:
Is there any way on Step 2 to have the device change from Not Registered to Registered?
Thanks!
08-06-2019 06:50 AM
08-06-2019 06:55 AM
08-06-2019 02:42 PM
Good idea. Thanks!
08-06-2019 03:18 PM
08-13-2019 03:37 PM
Hi @Jason Kunst
I tried your suggestions here - https://community.cisco.com/t5/identity-services-engine-ise/ise-mydevices-portal-customization-remove-the-column-for-pending/td-p/3466500 and it worked for the "Manage Device" page but can't seem to get it working on the "My Devices" page. The Pending status is still listed. I've tried inserting the Accepted solution script (from link above) in all three boxes but I can't quite get it to work. Any suggestions? Thanks in advance!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide