Cisco’s AnyConnect Network Access Manager (NAM)

teymur azimov · ‎03-28-2014

Hi dears,

I configurate EAP_FAST in Cisco ISE and want wired users authenticate from ISE. I install Network Access Manager Profile Editor and Cisco Anyconnect Security Mobility Client on PC. I configure Network Access Manager when i want to save as that I did not see the . \newConfigFiles folder. Then I did that: Organize’, ‘Folder and Search Options’, ‘Show hidden files, folders, and drives. but in this case i did see the network access manager folder.

I need a to install Cisco’s AnyConnect Network Access Manager (NAM) on PC. HOW I get this soft? I have a smartnet for ISE.

Which email address(to cisco) i must be write to get this soft?

Thanks.

stsargen · ‎04-08-2014

You can download the Network Access Manager module from CCO. This link should work if you have a CCO account.

http://software.cisco.com/download/release.html?mdfid=283000185&softwareid=282364313&release=3.1.05160&relind=AVAILABLE&rellifecycle=&reltype=latest&i=rs

The file name will be similar to anyconnect-win-3.1.05160-pre-deploy-k9.iso. Just unzip the ISO with 7zip or Winrar and you will see the NAM msi file anyconnect-nam-win-3.1.05149-k9.msi.