Network Access Control

hi,I have configured ise and redirection is working fine but I an having a challenge separating guest traffic from corporate traffic.I have attached a summary of my scenerio.

When attempting to configure an NTP authentication-key in the Cisco ISE CLI I noticed that it will not accept an md5 hash of 32 characters (16 bytes). Instead it is expecting a 40 character (20 bytes) hash. That is in line with a SHA-1 hash, not an M...

On the NAC agent, we can configure a discovery host manually.  Can it take multiple IP addresses? I've tried using semi-colon (;), colon (:), and comma (,), but the NAC agent won't send any discovery packets if these are configured. In my particular ...

HiTrying to figure out if there is a way to have a switch authenticate devices from two different domainsFor example   Computer A is in Domain A  Computer B is Domain BComputer A is connected to f0/1 computer B is connected to F0/2I am thinking that ...

Hey!I am having difficulties implementing Mac-auth on selected ports between an HP ProCurve 2510 and Cisco ACS 5.3.The 802.1x works just fine, but for selected ports I need to implement port-access with MAC-based authentication instead of regular 802...

Hi all Someone know if a 802.1x implementation with Cisco ISE, works with static IP in the endpoints or there are any issue in this deployment?I have a lab deployment but does not work fine with a static IP in the client (laptop) but when i work with...

I have a new ACS 5.6 appliance set up that uses Active Directory authentication. I created a shell profile, mapped it to the authorization rule, and then added devices to the system. The first device I added was able to use ACS to authenticate and au...

Currently I'm implementing 802.1x on a Catalyst 4500 L3 Switch and using ACS Version 5.5.0.46.5I'm having random problems with using MAB. I say random because when ever I do a show authentication sessions maybe 6 will fail out of 214. The phones that...

Hi,Could you please let me know if we support RADIUS over IPv6? 

Dear Team,    My customer wants to use Single Sign on for wired and wireless DOT1X clients using ACS 5.6. Is there any way we could do that? AD in integrated with ACS and cu wants to access multiple application using same windows credentials. Let me ...

HiWe have recently deployed Cisco ACS using two factor (RSA) authentication to manage our AAA access to our firewalls. This is now in place and working correctly however we have any issue with ASDM. The initial authentication works correctly howeve...

Hi All,I have 2 x ACS 5.6 VMs and looking into the best way to use these in our current network.We have about 30 sites in total each with a minimum of 5 AAA clients. Some sites will have 15+ AAA clients.At the moment we are using 1 x ACS 4.2 VM and a...

 The Anyconnect act as the 802.1x supplicant for the users, Some users don't have Anyconnect client as the supplicant , we need to push Anyconnect client to users  and then start the 802.1x process is it doable ???