cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1408
Views
10
Helpful
2
Replies

Disable Authentication for Reverse Telnet on Async lines

enewburn1
Beginner
Beginner

I have a 2811 that is acting as a terminal server with multiple async line being used for console access. Whenever I go to open a reverse telnet on one of the lines I always get hit up for my authentication credentials. Is there a way to eliminate the authentication requirement, but just on the async lines for reverse telnet? I can turn it off globally (which is no good) and I've tried entering "no login authentication" under the respective async lines - but still I am asked. Any thoughts? My existing global and line config:


aaa new-model
aaa authentication login default local-case
aaa authorization console
aaa authorization exec default local
!

line 1/0 1/15
session-timeout 30
exec-timeout 30 0
no exec
transport input telnet

1 Accepted Solution

Accepted Solutions

Philip D'Ath
Advisor
Advisor

I haven't tried this, but try something like the below (this requires aaa new-model):

aaa authentication login no-auth none
line 1/0 1/15
  login authentication no-auth 

View solution in original post

2 Replies 2

Philip D'Ath
Advisor
Advisor

I haven't tried this, but try something like the below (this requires aaa new-model):

aaa authentication login no-auth none
line 1/0 1/15
  login authentication no-auth 

Works Perfect!

Thanks dude

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: