09-20-2001 02:56 AM - edited 02-21-2020 09:57 AM
Hi !
I am trying to work with access-list per user on ACS and cisco 3640 with pri interface .
When i apply an access-list on the Cisco secure ACS v2.6 /user setup/Cisco IOS/PIX RADIUS Attributes/cisco-av-pair/(ip:inacl#1="permit tcp 10.10.10.0 0.0.0.255 192.168.1.0 0.0.0.255
Or ip:inacl=189 ), I try it under the group setup to .
The isdn bri interface failed to apply it.
The massage that i get is as fallow =
%PERUSER-3-ISDNINTF: Se0/0:16 access_group: Can not apply configuration to ISDN channel:
"ACL_No_Internet_In".
What i need to know is how can i apply an access-list that configure on the acs at the lcp stage or you can sagest me any other way .
p.s.
I know that i can not apply any configuration to isdn
interface at the negotiation stage
09-26-2001 07:05 AM
Do you already have an access-list applied to the router that is not allowing this change? This may be too complex to troubleshoot here without configs and debugs.
10-24-2001 08:33 AM
i resolved a problem with acl , PRI and ASC by configuring virtual-profil and interface virtual-template in cisco router 3640.
10-25-2001 12:42 PM
I have used ACL's in Cisco Secure before mostly as a group setting. It looks to me that all you need to do is remove the "ip:" from the acl. HTH
10-27-2001 10:55 PM
Hi !
thank you very much for you're help
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide